Worksheets · Precalculus

Unit circle worksheet

The unit circle has radius 1 and its center at the origin. The terminal side of an angle θ meets it at the point (cos θ, sin θ), so the coordinates are the cosine and the sine, and tan θ is y over x. Learn the three quadrant I points, at 30°, 45° and 60°; every other special point has the same numbers with signs set by its quadrant. Easy works in quadrant I and converts degrees and radians; medium uses all four quadrants, reference angles and signs; hard takes negative angles and angles past one turn, solves for every angle with a given value, and finds cosecant, secant and cotangent.

Not quite the one you need? Same words, different skill:

Select your difficulty

Pick more than one for a sheet that mixes them.

The preview can look cramped on a phone. The PDF and printed sheet come out normal.

Free math worksheets at sigmaprep.io/worksheets© 2026 Sigma Prep

Sigma Prep · sigmaprep.io/worksheets

Name

The Unit Circle

Date Period

Follow the heading above each group. Give exact values.

  1. Find each point on the unit circle, or the coordinate asked for. Watch the signs

    Starting at (1,0), move π6 radians counterclockwise around the unit circle. Give the y-coordinate of the point you reach.
  2. An angle of 225∘ is in standard position. Give the x-coordinate of the point where it crosses the unit circle.
  3. The terminal side of θ is in quadrant II, and its reference angle is π3. Find the coordinates of the point where it meets the unit circle.
  1. Find the sine, cosine and tangent. Write undefined where a value does not exist

    The point (−12,−32) is on the unit circle at angle θ. Use it to write sin⁡θ, cos⁡θ and tan⁡θ.
  2. Use the point on the unit circle at θ=360∘, which is on an axis, to find sin⁡θ, cos⁡θ and tan⁡θ.
  3. Find sin⁡θ, cos⁡θ and tan⁡θ for θ=30∘.
  1. Find each reference angle

    Give the reference angle of 11π18 in radians.
  2. Find the reference angle of 155∘.
  3. An angle measures 7π12. Find its reference angle in radians.
  1. Use the signs of x and y in each quadrant to answer each question

    Without finding the values, tell whether sin⁡320∘, cos⁡320∘ and tan⁡320∘ are positive or negative.
  2. (x,4873) lies on the unit circle, in quadrant II. What is x?
  3. cos⁡θ<0 and tan⁡θ>0. In which quadrant does the terminal side of θ lie?

Free math worksheets at sigmaprep.io/worksheets© 2026 Sigma Prep

Sigma Prep · sigmaprep.io/worksheets

Name

The Unit CircleAnswer keyVersion 1

Date Period

Follow the heading above each group. Give exact values.

  1. Find each point on the unit circle, or the coordinate asked for. Watch the signs

    Starting at (1,0), move π6 radians counterclockwise around the unit circle. Give the y-coordinate of the point you reach.y=12
  2. An angle of 225∘ is in standard position. Give the x-coordinate of the point where it crosses the unit circle.x=−22
  3. The terminal side of θ is in quadrant II, and its reference angle is π3. Find the coordinates of the point where it meets the unit circle.(−12,32)
  1. Find the sine, cosine and tangent. Write undefined where a value does not exist

    The point (−12,−32) is on the unit circle at angle θ. Use it to write sin⁡θ, cos⁡θ and tan⁡θ.sin⁡θ=−32, cos⁡θ=−12, tan⁡θ=3
  2. Use the point on the unit circle at θ=360∘, which is on an axis, to find sin⁡θ, cos⁡θ and tan⁡θ.sin⁡θ=0, cos⁡θ=1, tan⁡θ=0
  3. Find sin⁡θ, cos⁡θ and tan⁡θ for θ=30∘.sin⁡θ=12, cos⁡θ=32, tan⁡θ=33
  1. Find each reference angle

    Give the reference angle of 11π18 in radians.7π18
  2. Find the reference angle of 155∘.25∘
  3. An angle measures 7π12. Find its reference angle in radians.5π12
  1. Use the signs of x and y in each quadrant to answer each question

    Without finding the values, tell whether sin⁡320∘, cos⁡320∘ and tan⁡320∘ are positive or negative.sin⁡320∘ is negative, cos⁡320∘ is positive, tan⁡320∘ is negative
  2. (x,4873) lies on the unit circle, in quadrant II. What is x?x=−5573
  3. cos⁡θ<0 and tan⁡θ>0. In which quadrant does the terminal side of θ lie?Quadrant III

Free math worksheets at sigmaprep.io/worksheets© 2026 Sigma Prep

How to do these

Give the coordinates of the point on the unit circle at θ=150∘.

  1. 150° is in quadrant II, and its reference angle is 180° − 150° = 30°.
  2. The point at 30° is (√3/2, 1/2).
  3. In quadrant II, x is negative and y is positive.

The answer is (−32,12).

Where students go wrong

Swapping the coordinates. The x-coordinate is the cosine and the y-coordinate is the sine, so the point at 30° is (√3/2, 1/2), not (1/2, √3/2), which is the point at 60°.

Also called unit circle coordinates, unit circle practice, unit circle trig values or unit circle radians and degrees.

What you can put on this worksheet

Points at quadrant I angles; all four quadrants; negative angles and angles past 360°
Write the coordinates of the point on the unit circle for the angle π3 radians. → (12,32)
Degrees and radians; sine, cosine and tangent; every angle with a given value
Change π4 radians to degrees. → 45∘
Points, angles and arcs; reference angles; cosecant, secant and cotangent
Does (0.6,0.5) lie on the unit circle? Check with x2+y2=1. → No: 0.62+0.52=0.61, not 1
Missing coordinates; signs by quadrant; angles from two facts
The point (4873,y) is on the unit circle in quadrant I. Find y. → y=5573

Questions about these worksheets

Yes. Every unit circle sheet is free to print and free to download as a PDF. There is no account to make, no email to hand over and no limit on how many you take.

Yes. The answer key prints on a second page, and you can choose whether it shows each question beside its answer or just the answers in a list.

Yes. Print straight from the page, or download the PDF and print that. The sheet is laid out for paper rather than squeezed off a screen, so there is room to work under each question, and the answer key comes out on its own page.

Precalculus is usually taken around 11th or 12th grade, though schools vary and plenty of students meet it earlier or later. Pick the difficulty rather than the grade: the easy level suits a first lesson on it, the hard level suits review before a test.

Yes, as many as you like. The questions are built fresh each time rather than picked from a fixed set of files, so pressing Generate gives a new sheet. That is what you want for a second class, a retake, or two students sitting next to each other.

That is the closest comparison, and Kuta Software is good software. It is also paid software you install on a computer. These worksheets run in a browser tab for free, with no account and nothing to install. Like Kuta, the unit circle questions are generated when you ask for them rather than pulled from a fixed set of files, so two classes never get the same sheet, and the answer key comes with it.

Yes. There are three levels, and you can tick more than one for a sheet that mixes them, in which case the questions come out easiest first. The harder levels are not just larger numbers: they ask for something the easy ones do not.

You pick from 4: points at quadrant i angles; all four quadrants; negative angles and angles past 360°, degrees and radians; sine, cosine and tangent; every angle with a given value, points, angles and arcs; reference angles; cosecant, secant and cotangent and missing coordinates; signs by quadrant; angles from two facts. Tick as many as you want and set how many of each, or let it spread them evenly.

Swapping the coordinates. The x-coordinate is the cosine and the y-coordinate is the sine, so the point at 30° is (√3/2, 1/2), not (1/2, √3/2), which is the point at 60°.