Worksheets · AP Physics 1

AP Physics 1 Unit 6 Free Response: Rotational Energy & Momentum

Four original free-response questions on Unit 6, one of each kind on the exam, with a scoring guide and a printable PDF with room to write, free to use in class. Good practice before the Unit 6 Progress Check in AP Classroom. Multiple choice for this unit: Unit 6 worksheet.

Sigma Prep · sigmaprep.io/worksheets/ap-physics-1

Name

AP Physics 1 Unit 6 Free Response: Rotational Energy & Momentum

Date Version A

Directions: Answer each part in the space below it. Show your work: the principle or equation you start from, the values you use and your reasoning. A justification needs a physics reason, not just an equation. Give numerical answers with units. A calculator and the AP Physics 1 equation sheet may be used throughout; use g = 9.8 m/s². The four questions are worth 40 points.

Free response: a calculator and the equation sheet are allowed.

Questions 1–4
  1. Question 1: Mathematical Routines (10 points)
    1.
    A uniform solid sphere of mass M and radius R, with rotational inertia 25MR2 about its center, rolls without slipping down a ramp that makes an angle θ with the horizontal.
    1. (a)
      Derive an expression for the magnitude of the acceleration of the sphere's center, in terms of θ and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    2. (b)
      Derive an expression for the magnitude of the static friction force on the sphere, in terms of M, θ, and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    3. (c)
      The ramp makes an angle of 37∘ with the horizontal. Calculate the acceleration of the center. Use g=9.8 m/s2.
    4. (d)
      A thin hoop of the same mass and radius (rotational inertia MR2) rolls without slipping down the same ramp. Is its acceleration greater than, less than, or equal to the sphere's? Justify your answer.
  2. Question 2: Translation Between Representations (12 points)
    2.
    Two identical potter's wheels, P and Q, are uniform disks of mass M and radius R (rotational inertia 12MR2) that turn on frictionless axles through their centers. Each starts at rest. From t=0 to t=t1, a string is pulled tangentially with the same constant force F on each: on P the string is wrapped around the rim, at radius R, and on Q around a light hub of radius R3. At t1 both strings come off, and no other torque acts on either potter's wheel until t=2t1. Let ω1 be the angular speed of Q at t1.
    1. (a)
      On the axes, sketch the angular momentum L of P and of Q as functions of time from t=0 to t=2t1. Label the lines P and Q.

      Figure 1

      Ltt12t1
    2. (b)
      On the axes, sketch the angular velocity ω of P and of Q as functions of time from t=0 to t=2t1. Label the lines P and Q, mark the angular velocity each reaches at t1 in terms of ω1, and explain how you found P's value.

      Figure 2

      ωtt12t1
    3. (c)
      Derive an expression for the rotational kinetic energy of P at t=t1, in terms of F, t1, M, and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    4. (d)
      A student says: “The potter's wheels are identical, and each string was pulled with the same force for the same time, so P and Q end with the same angular momentum and the same kinetic energy.” Explain why the student is wrong about the angular momentum and why the student is wrong about the kinetic energy, in a clear, coherent, paragraph-length response.
  3. Question 3: Experimental Design and Analysis (10 points)
    3.
    Students want to determine the rotational inertia I of a flywheel that turns on an axle. A brake pad pressed against its rim exerts a constant frictional torque of magnitude 0.50 N⋅m on it, measured earlier; the axle's own drag is small enough to ignore. The equipment available includes a photogate, with its timer, and a small flag fixed to the rim that blocks the photogate's beam once each turn; a white mark is painted on the rim, and the brake is applied as the mark passes a fixed pointer beside the rim.
    1. (a)
      Describe a procedure the students could use to collect data that would allow them to determine I. Include what is measured and with which equipment.
    2. (b)
      Describe one way the students could reduce the experimental uncertainty in their value of I.
    3. (c)
      The table shows their data: ω0 is the flywheel's angular speed as the brake goes on, and Δθ is the angle it turns through while the brake stops it. Indicate which quantities could be graphed to yield a straight line whose slope could be used to determine I, and how I is related to the slope. You may use the remaining columns of the table for any quantities you calculate.

      Table 1

      ω0 (rad/s)Δθ (rad)
      6.015
      7.924
      10.041
      11.856
      14.384
    4. (d)
      On the grid, plot the data for the quantities indicated in part (c), calculating any values that are not in the table. Clearly label the axes, including units, and use linear scales. Draw a straight best-fit line for the data.

      Figure 1

    5. (e)
      Using the best-fit line, calculate an experimental value for I.
  4. Question 4: Qualitative/Quantitative Translation (8 points)
    4.
    A heavy door hangs on frictionless hinges and is at rest; its rotational inertia about the hinges is I. A rubber ball of mass m moves horizontally at speed u, perpendicular to the door, and strikes it at a distance d from the hinges. The ball bounces straight back with speed b, and the door starts to swing.
    1. (a)
      Derive an expression for the angular speed of the door just after the ball bounces off. Express your answer in terms of m, u, b, d, I, and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    2. (b)
      A classmate proposes ω=(u−b)mdI, and notes that its units do work out to s−1. Without deriving anything, explain why this expression cannot be correct by considering how it depends on the rebound speed b.
    3. (c)
      Use your expression from part (a) to find the angular speed if the ball instead stopped dead on hitting the door. Also find how many times as large the angular speed is when the ball bounces back at half its arrival speed (b=u2) as when it stops dead.

      End of Version A

Free AP Physics 1 worksheets at sigmaprep.io/worksheets/ap-physics-1Original questions written by Sigma Prep. AP is a registered trademark of the College Board, which is not affiliated with this sheet.

Scoring guide · Version A

Question 1Mathematical Routines · Topic 6.5 · 10 points

(a) 3 points Derivation

  • 1 point: Writes Newton's second law along the ramp, Mgsin⁡θ−Ff=Ma.
  • 1 point: Writes the rotational form about the center, FfR=Iα, using α=aR (the point needs both).
  • 1 point: Correct result a=57gsin⁡θ.

Also acceptable: Either route earns points 1 and 2: energy conservation with both kinetic energies, Mgssin⁡θ=12Mv2+12Iω2 with ω=vR after a distance s along the ramp, then v2=2as for the constant acceleration. For point 3: Any algebraically equivalent expression.

Model answer

Newton's second law along the ramp, Mgsin⁡θ−Ff=Ma, and in rotational form about the center, FfR=25MR2α, with α=aR. Then Ff=25Ma and a=57gsin⁡θ.

(b) 2 points Derivation

  • 1 point: Substitutes the acceleration into FfR=IaR, consistent with part (a).
  • 1 point: Correct result, consistent with part (a): Ff=27Mgsin⁡θ for the correct a.

Also acceptable: For point 1: The translational form, Mgsin⁡θ−Ff=Ma, with the same acceleration. For point 2: Any algebraically equivalent expression.

Model answer

About the center, FfR=Iα=25MR2aR, so Ff=25Ma. With a=57gsin⁡θ from part (a), Ff=27Mgsin⁡θ.

(c) 2 points Calculation

  • 1 point: Substitutes the given angle into the expression for a, consistent with part (a).
  • 1 point: Correct value, consistent with part (a): 4.2 m/s2 for the correct expression.

Also acceptable: For point 2: A value that rounds to the same answer to two or three significant figures, with correct units.

Model answer

a=57(9.8 m/s2)sin⁡37∘=4.2 m/s2.

(d) 3 points Claim and justification

  • 1 point: Claims the hoop's acceleration is less.
  • 1 point: Reasons that the hoop has the larger rotational inertia (its mass is at the rim).
  • 1 point: Reasons that the same acceleration would need a larger friction force on the hoop, so the hoop's smaller net force gives a smaller acceleration (the point needs both).

Also acceptable: Either route earns points 2 and 3: redoing the derivation of part (a) with I=MR2, consistent with part (a): a=12gsin⁡θ for the hoop against the sphere's 57gsin⁡θ for the correct derivation. For point 3: An energy argument: a larger share of the hoop's kinetic energy goes into rotation, so it gains translational speed more slowly.

Model answer

Less. The hoop's mass is all at its rim, so it has the larger rotational inertia. If the hoop had the same acceleration as the sphere, it would need the same angular acceleration aR, and with its larger rotational inertia a larger friction force, Ff=IaR2, to give it. A larger friction force leaves a smaller net force along the ramp, and so a smaller acceleration, which contradicts the assumption. So the hoop's acceleration is less.

Question 2Translation Between Representations · Topic 6.3 · 12 points

(a) 4 points Sketch or graph

  • 1 point: Both lines straight from the origin to t1 (a constant torque on each; the point needs both lines).
  • 1 point: P's line three times as steep as Q's (torque FR against 13FR).
  • 1 point: Each line continuous at t1: no jump in L.
  • 1 point: Both lines horizontal from t1 to 2t1.

Also acceptable: For point 2: P's line between 2.5 and 3.5 times as steep as Q's.

Model answer

Both rise linearly from zero until t1 and then stay constant at the value reached, with no jump (no torque acts after t1). The slope is the torque: FR for P and 13FR for Q, so P reaches FRt1 and Q one-third of that.
00.51.01.52.000.250.500.751.001.25t (units of t1)L (units of FRt1)1/3PQ

(b) 3 points Sketch or graph

  • 1 point: Both lines labeled P and Q (the point needs all three: the labels, the rise from zero and the constant part), consistent with part (a): each rising from zero until t1, then constant for the correct part (a) lines.
  • 1 point: P marked 3ω1 and Q marked ω1 at t1, consistent with part (a): 3ω1 for the correct ratio of 3 (the point needs both marks).
  • 1 point: Explains that the equal rotational inertias put the angular velocities in the same ratio as the angular momenta (ω=LI).

Also acceptable: For point 3: Newton's second law for rotation: with equal rotational inertias, P's angular acceleration τI is three times Q's for the same time.

Model answer

Each line has the shape of that potter's wheel's line in part (a): straight from zero until t1, then constant. The two have the same rotational inertia, so ω=LI is in the same ratio as their angular momenta: P reaches 3ω1 while Q reaches ω1.
00.51.01.52.000.51.01.52.02.53.03.5t (units of t1)ω (units of ω1)PQ

(c) 3 points Derivation

  • 1 point: Uses the angular impulse τΔt=ΔL.
  • 1 point: Uses K=L22I with I=12MR2 (the point needs both).
  • 1 point: Correct result K=F2t12M (the radius cancels).

Also acceptable: For point 1: Newton's second law for rotation, τ=Iα, with constant-acceleration kinematics, ω=αt1. For point 2: K=12Iω2 with I=12MR2. For point 3: Any algebraically equivalent expression.

Model answer

The angular impulse gives L=τt1=FRt1. Then K=L22I, with 2I=MR2: K=(FRt1)2MR2=F2t12M.

(d) 2 points Claim and justification

  • 1 point: Explains the angular-momentum error: the same force exerts three times the torque at the rim as at the hub.
  • 1 point: Explains the kinetic-energy error: K=L22I is larger for P's larger angular momentum, since the rotational inertias are equal.

Also acceptable: For point 1: Newton's second law for rotation with constant-acceleration kinematics: the same force at a larger radius gives a larger angular acceleration, so a larger angular speed and angular momentum after the same time. For point 2: K=12Iω2 with equal rotational inertias and P spinning faster. Also for point 2: The work route: P's torque is three times Q's, so P turns through three times the angle in the same time, and its string unwinds at three times the radius; the same force pulls the rim string nine times as far as the hub string, does nine times as much work on P, so P has more kinetic energy.

Model answer

A force changes angular momentum through its torque, which depends on where it acts: the same force at the rim, three times as far from the axle as the hub, exerts three times the torque. Acting for the same time, it gives P three times the angular impulse, so P ends with three times the angular momentum of Q. Kinetic energy depends on the angular momentum and the rotational inertia, K=L22I, and the two have the same rotational inertia, so P, with more angular momentum, has more kinetic energy.

Question 3Experimental Design and Analysis · Topic 6.1 · 10 points

(a) 3 points Experimental procedure

  • 1 point: Finds ω0 just before the brake goes on from the photogate's time for one turn of the flag (ω0=2πT).
  • 1 point: Measures Δθ as the whole turns the mark makes plus the fraction of the last turn, from the pointer to where the mark stops, converted to radians at 2π rad per turn (the point needs all three: the whole turns, the fraction and the conversion to radians).
  • 1 point: Varies ω0 over at least five values.

Also acceptable: Earns point 2: the whole turns counted as the times the flag blocks the photogate's beam (one per turn), with the flag in line with the mark and the photogate at the pointer, plus the fraction of the last turn from the pointer to where the mark stops, converted to radians at 2π rad per turn (all three still needed).

Model answer

Spin the flywheel up by hand, and apply the brake as the mark passes the pointer. Just before the brake goes on, the photogate times one turn of the flag; with that time T the angular speed is ω0=2πT. Count the whole turns the mark makes until the flywheel stops, add the fraction of the last turn from the pointer to where the mark stops, and convert to radians (2π rad per turn) to get Δθ. Repeat for at least five different values of ω0.

(b) 1 point Reducing uncertainty

  • 1 point: Repeated stops at each angular speed, averaged.

Also acceptable: For point 1: More angular speeds (more data points) or a wider range of angular speeds.

Model answer

Repeat the stop several times at each angular speed and average the angles.

(c) 2 points Linearizing data

  • 1 point: Δθ against ω02 (either quantity may be on either axis).
  • 1 point: I=2τ(slope), since the slope is I2τ.

Also acceptable: For point 1: another pair, Δθ against ω0 (slope I2τ). For point 2: with ω02 against Δθ, I=2τslope; with Δθ against ω0, I=2τ(slope)2.

Model answer

Graph Δθ against ω02. The brake's torque does negative work −τΔθ that removes all the rotational kinetic energy: τΔθ=12Iω02, so Δθ=I2τω02, a straight line through the origin with slope I2τ, and I=2τ(slope).

(d) 3 points Graphing data

  • 1 point: Axes labeled with the quantities and units, with linear scales (the point needs both).
  • 1 point: Points plotted correctly, consistent with part (c).
  • 1 point: A single straight best-fit line (not connecting the dots).

Model answer

The values of ω02 are 36, 62, 100, 139, 204 rad2/s2. The points lie close to a straight line through the origin. The best-fit line passes through (0,0) and (200 rad2/s2,82 rad).
050100150200250020406080100ω02 (rad2/s2)Δθ (rad)

(e) 1 point Value from the best-fit line

  • 1 point: Correct value from the slope of the best-fit line (not from a single data point), consistent with part (c): I≈0.41 kg⋅m2 for the correct relation.

Also acceptable: A slope read from two points on the student's own best-fit line (a data point that lies on the line may be one of them); the value that follows from that slope earns the value point when it falls in the accepted range. For point 1: Accepted range for the value: 0.39 kg⋅m2 to 0.43 kg⋅m2 (5% either way of the guide's value, 0.41 kg⋅m2). Also for point 1: With ω02 against Δθ from part (c): I=2τslope; with Δθ against ω0: I=2τ(slope)2.

Model answer

The slope of the best-fit line is (82−0) rad(200−0) rad2/s2=0.410 s2/rad, found from the two points (0,0) and (200 rad2/s2,82 rad). So I=2τ(slope)=2(0.50 N⋅m)(0.410 s2/rad)=0.41 kg⋅m2.

Question 4Qualitative/Quantitative Translation · Topic 6.4 · 8 points

(a) 3 points Derivation

  • 1 point: Conservation of angular momentum about the axis of rotation.
  • 1 point: The ball's angular momentum after the bounce is opposite, −mbd.
  • 1 point: Correct result ω=(u+b)mdI.

Also acceptable: For point 3: Any algebraically equivalent expression.

Model answer

The hinges exert no torque about the axis, so the angular momentum of the ball-door system about it is conserved. The ball's angular momentum reverses: mud=−mbd+Iω, so ω=(u+b)mdI.

(b) 3 points Claim and justification

  • 1 point: Identifies the wrong dependence on b: the expression makes the door swing more slowly for a faster rebound.
  • 1 point: Explains that a larger b means a larger change in the ball's momentum (it is m(u+b)).
  • 1 point: Uses Newton's third law: the door receives the opposite impulse from the ball, so the door's angular momentum is larger too.

Also acceptable: The limiting case b=u earns points 1 and 2: the expression gives ω=0 although the ball's momentum changes by 2mu, so the door must turn; point 3 still needs the door's opposite impulse. Earns point 3: conservation of the ball-door system's angular momentum: the door gains the angular momentum the ball loses, m(u+b)d, which grows with b.

Model answer

It says that the faster the ball bounces back (larger b), the more slowly the door swings. But a faster rebound means a larger change in the ball's momentum, from mu one way to mb the other, m(u+b) in all, so the door exerts a larger impulse on the ball. By Newton's third law the ball exerts an equal and opposite impulse on the door, at the distance d from the hinges, so the door gains more angular momentum and should swing faster for a faster rebound, not more slowly.

(c) 2 points Consistency check

  • 1 point: With b=0, consistent with part (a): ω=mudI for the correct expression.
  • 1 point: Finds how many times as large the angular speed for b=u2 is as when the ball stops dead, consistent with part (a): 32 times for the correct factor u+b.

Model answer

With b=0, ω=mudI. With b=u2, the factor u+b is 3u2, so ω=3mud2I, which is 32 times as large as when the ball stops dead.

What does the AP Physics 1 free response ask on Unit 6?

Questions about this set

Since 2025 the free-response section has four questions, one of each kind: Mathematical Routines (10 points: derive and calculate, then a claim with a justification), Translation Between Representations (12 points: draw a diagram, bar chart or graph, derive, and connect the representations), Experimental Design and Analysis (10 points: a procedure, a linear graph from data and a value from its slope), and Qualitative/Quantitative Translation (8 points: reason without equations, derive, then check that the two agree). This set has one of each, in that order.

Points are earned for specific pieces of work: starting from a correct principle, an expression in the requested symbols, a value with units, a sketch with the right shape, a claim with its physics reason. The scoring guide lists every point and what earns it, other acceptable methods, and a model answer for each part. On the exam the free response is half of the score.

Yes, throughout, as on the exam: a calculator and the AP Physics 1 equation sheet are allowed on both sections. Use g = 9.8 m/s², the value on the equation sheet.

No. Every question is original, written by Sigma Prep in the format of the exam. Before the set was published, an independent checker re-derived every expression, recomputed every value and its units, and read every graph and diagram back from the drawing.

The progress check is College Board's own end-of-unit quiz in AP Classroom, assigned by your teacher, and its free-response questions are not public: we do not have them, and Sigma Prep is not affiliated with College Board. This set is exam-style practice on the same unit: one question of each kind on the exam, with a scoring guide that says what earns each point. Write your answers in full, score them with the guide, then redo the parts that lost points.

Yes: the Unit 6 multiple-choice worksheet, and the mixed free-response set, which is laid out like a full free-response section with each question on a different unit.

AP is a registered trademark of the College Board, which was not involved in making this set and does not endorse it. All questions are original to Sigma Prep. Frozen 2026-11-19.