Worksheets · AP Physics 1

AP Physics 1 Unit 1 Free Response: Kinematics

Four original free-response questions on Unit 1, one of each kind on the exam, with a scoring guide and a printable PDF with room to write, free to use in class. Good practice before the Unit 1 Progress Check in AP Classroom. Multiple choice for this unit: Unit 1 worksheet.

Sigma Prep · sigmaprep.io/worksheets/ap-physics-1

Name

AP Physics 1 Unit 1 Free Response: Kinematics

Date Version A

Directions: Answer each part in the space below it. Show your work: the principle or equation you start from, the values you use and your reasoning. A justification needs a physics reason, not just an equation. Give numerical answers with units. A calculator and the AP Physics 1 equation sheet may be used throughout; use g = 9.8 m/s². The four questions are worth 40 points.

Free response: a calculator and the equation sheet are allowed.

Questions 1–4
  1. Question 1: Mathematical Routines (10 points)
    1.
    A soccer ball is kicked from a level field at an angle ϕ above the ground. It lands on the field a time T after it is kicked. Ignore air resistance and the size of the ball, and use a coordinate system with +x horizontal in the direction of travel and +y vertically up.
    1. (a)
      On the two sets of axes, sketch graphs of vx and vy, the horizontal and vertical velocity components of the ball, against time t. Start when the ball leaves the ground and stop when it is back at the ground.

      Figure 1

      tvxtvy
    2. (b)
      Derive an expression for the launch speed v0 of the ball in terms of ϕ, T, and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    3. (c)
      The angle is ϕ=37∘ and the ball lands T=1.5 s after it is kicked. Calculate the launch speed. Use g=9.8 m/s2.
    4. (d)
      Suppose the ball instead leaves the ground with the same speed v0 but at a steeper angle. Is it in the air for a time that is greater than, less than, or equal to T? Justify your answer with reasoning that goes beyond referring to an equation.
  2. Question 2: Translation Between Representations (12 points)
    2.
    A delivery robot moves along a straight warehouse aisle in four identical stages. In each stage it starts from rest at one shelf, speeds up with a constant acceleration of magnitude a, and covers a distance s to the next shelf, where its brakes stop it in a negligibly short time. It then immediately starts the next stage. Take the robot's direction of travel as positive.
    1. (a)
      On the axes provided, sketch the robot's velocity v as a function of time t for all four stages.

      Figure 1

      tv
    2. (b)
      Mark the robot's average velocity for the whole trip on your graph from part (a) as a horizontal dashed line, and label it vavg.
    3. (c)
      Derive an expression for the duration of one stage in terms of s, a, and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    4. (d)
      The shelves are rearranged so that each stage is shorter, while the robot keeps the same acceleration. Is its average velocity for a trip greater than, less than, or equal to its average velocity before? Justify your answer using your graph and your expression from part (c).
  3. Question 3: Experimental Design and Analysis (10 points)
    3.
    A cart on a long, level track carries a small battery-powered fan that pushes it with a constant force. A student wants to determine the acceleration of the cart. The fan is switched on and the cart is let go from rest at position x=0 at time t=0, with x measured along the track.
    1. (a)
      Describe a procedure the student could use to collect data to determine the acceleration of the cart. Include the equipment used and the quantities measured.
    2. (b)
      Describe one way the student could reduce the uncertainty in the experimental value of the acceleration of the cart.
    3. (c)
      The student collects the data shown in the table.

      Table 1

      t (s)x (m)
      0.500.071
      1.000.276
      1.500.614
      2.001.150
      2.501.716
      3.002.518
      Indicate which quantities could be graphed to yield a straight line whose slope could be used to calculate the acceleration. You may use the remaining columns of the table for any quantities you calculate.
    4. (d)
      On the grid, plot the data for the quantities indicated in part (c). Label both axes with the quantities and their units, use linear scales, and draw a best-fit line.

      Figure 1

    5. (e)
      Using the best-fit line, calculate an experimental value for the acceleration of the cart.
    6. (f)
      Using your value from part (e), predict the speed of the cart 2.0 s after it is released.
  4. Question 4: Qualitative/Quantitative Translation (8 points)
    4.
    Train A and Train B travel along a straight, level track. Train A moves with speed v0 and Train B with speed 3v0. Each brakes and slows to a stop with the same constant acceleration of magnitude a.
    1. (a)
      Is the stopping distance of Train B more than three times, three times, or less than three times the stopping distance of Train A? Justify your answer using velocity-time graphs of the two trains (you may sketch them), without deriving or using equations.
    2. (b)
      Derive an expression for the stopping distance d of Train A. Express your answer in terms of v0, a, and physical constants, as appropriate. Begin your derivation by writing a fundamental physics principle or an equation from the reference information.
    3. (c)
      Is your expression from part (b) consistent with your claim in part (a)? Also state what your expression predicts for a very large braking acceleration (the acceleration approaching infinity), and whether that trend is physically reasonable.

      End of Version A

Free AP Physics 1 worksheets at sigmaprep.io/worksheets/ap-physics-1Original questions written by Sigma Prep. AP is a registered trademark of the College Board, which is not affiliated with this sheet.

Scoring guide · Version A

Question 1Mathematical Routines · Topic 1.5 · 10 points

(a) 2 points Sketch or graph

  • 1 point: vx is a horizontal line at a positive value.
  • 1 point: vy is a straight line sloping down from above the time axis to below it (the point needs both: the straight downward line and the change of sign).

Model answer

vx: a horizontal line at a constant positive value. vy: a straight line with constant negative slope, starting positive, crossing zero halfway through, and ending at the negative of its starting value.
tvxtvy

(b) 3 points Derivation

  • 1 point: Starts from a vertical kinematics equation for the whole flight, such as Δy=vy0t+12ayt2, with Δy=0 at t=T (the point needs both: the equation and the condition at landing).
  • 1 point: Uses the vertical component v0sin⁡ϕ.
  • 1 point: Correct result v0=gT2sin⁡ϕ.

Also acceptable: Earns point 1: vy=vy0+ayt with vy=0 at the top, which the ball reaches at t=T2 (the flight is symmetric); point 2 still needs vy0=v0sin⁡ϕ. Earns point 1: vy=vy0+ayt with vy=−vy0 at landing, t=T (the flight is symmetric); point 2 still needs vy0=v0sin⁡ϕ. For point 3: Any algebraically equivalent expression.

Model answer

Vertically, Δy=vy0t+12ayt2. The vertical component of the launch velocity is vy0=v0sin⁡ϕ, ay=−g, and the ball is back on the field, Δy=0, at t=T: 0=(v0sin⁡ϕ)T−12gT2. So v0=gT2sin⁡ϕ.

(c) 2 points Calculation

  • 1 point: Substitutes the given values into the expression, consistent with part (b).
  • 1 point: Correct value, 12 m/s, with units.

Also acceptable: For point 2: A value that rounds to the same answer to two or three significant figures, with correct units.

Model answer

v0=(9.8 m/s2)(1.5 s)2sin⁡37∘=12 m/s.

(d) 3 points Claim and justification

  • 1 point: Claims the time in the air is greater.
  • 1 point: A steeper angle gives a larger vertical component of the same launch speed.
  • 1 point: The same downward acceleration g takes longer to bring a larger upward vertical velocity to zero, so the ball stays in the air longer.

Also acceptable: Earns point 3 (point 2 as above, the larger vertical component): the ball rises higher, and its fall from the greater height takes longer.

Model answer

Greater than. At a steeper angle more of the same launch speed is vertical, so the vertical velocity starts larger. Gravity reduces the vertical velocity at the same rate g in both launches, so the steeper ball takes longer to reach the top, and as long again to fall back to the field: it stays in the air longer.

Question 2Translation Between Representations · Topic 1.3 · 12 points

(a) 3 points Sketch or graph

  • 1 point: Straight segments of equal positive slope (constant acceleration in each stage).
  • 1 point: Each segment starts at zero and ends with a vertical drop to zero at a shelf (the point needs both).
  • 1 point: Four teeth, each lasting the same time and reaching the same peak velocity (the point needs all three: four teeth, the same duration and the same peak velocity).

Model answer

A sawtooth: 4 identical straight segments, each rising from zero with the same positive slope a for the same time, and each ending with a sudden drop to zero at a shelf.
tv

(b) 2 points Sketch or graph

  • 1 point: A horizontal line labeled vavg (the point needs both).
  • 1 point: At half the peak velocity, consistent with part (a): half the peak for the correct straight teeth (each tooth averages half its peak).

Model answer

A horizontal line at half the peak velocity of the teeth: during each stage the velocity rises steadily from zero, so its average is half its greatest value, and every stage is the same.
tvvavg

(c) 3 points Derivation

  • 1 point: Starts from a constant-acceleration equation that relates distance, acceleration and time, such as Δx=v0t+12at2.
  • 1 point: Substitutes v0=0 and Δx=s (the point needs both).
  • 1 point: Correct result t=2sa.

Also acceptable: Writing s=12at2 directly earns points 1 and 2. For point 3: Any algebraically equivalent expression.

Model answer

A constant-acceleration equation: Δx=v0t+12at2. Each stage starts from rest, v0=0, and covers Δx=s: s=12at2, so t=2sa.

(d) 4 points Claim and justification

  • 1 point: Claims the average velocity is less than before.
  • 1 point: Reasons that each tooth peaks at a times the response's part (c) stage time, consistent with part (c): lower for the correct shorter time.
  • 1 point: Places the average-velocity line at half of the new peak, consistent with parts (b) and (c): a lower line for the correct part (c) time.
  • 1 point: Shows through vavg=st how the average depends on s for the response's own part (c) time, consistent with part (c): smaller for a smaller s for the correct expression, as2.

Also acceptable: Earns point 2: a peak of 2as (from v2=2as), lower for a smaller s; or the graph argument that each tooth's area is s, so a tooth of the same slope with a smaller area peaks lower.

Model answer

Less than. With a smaller s, part (c) gives a shorter stage time t=2sa. On the graph each tooth then rises at the same slope a for less time, so it peaks lower, and the average-velocity line of part (b), at half the peak, is lower with it. From part (c): vavg=st=as2, which is smaller for a smaller s.

Question 3Experimental Design and Analysis · Topic 1.3 · 10 points

(a) 3 points Experimental procedure

  • 1 point: Measures the position x with a motion detector or a meterstick.
  • 1 point: Times t from the release with a stopwatch, an electronic timer or the time stamps of the instrument's readings.
  • 1 point: Varies t over at least five values.

Also acceptable: Earns point 3: varying x over at least five marked positions on the track and timing the cart from release to each.

Model answer

Release the cart from rest at x=0. Use a motion detector to measure the cart's position x; its readings also give the time t after release of each position. Record x and t at several (at least five) instants.

(b) 1 point Reducing uncertainty

  • 1 point: Repeated releases averaged.

Also acceptable: For point 1: More data points (more instants recorded) or a wider range of times (a longer track).

Model answer

Repeat the release several times and average the positions recorded at each time.

(c) 1 point Linearizing data

  • 1 point: Graphs x against t2 (either quantity may be on either axis).

Also acceptable: For point 1: Another pair: x against t (the slope is a2).

Model answer

Graph x on the vertical axis and t2 on the horizontal axis. Starting from rest, x=12at2, so the slope is 12a.

(d) 3 points Graphing data

  • 1 point: Both axes labeled with the quantities and their units, with linear scales (the point needs both).
  • 1 point: Data points plotted correctly, consistent with part (c).
  • 1 point: A single straight best-fit line, not a line joining the points.

Model answer

The points lie close to a straight line through the origin. The best-fit line passes through the grid points (0,0) and (7.2 s2,2.0 m).
024681000.51.01.52.02.53.0t2 (s2)x (m)

(e) 1 point Value from the best-fit line

  • 1 point: Correct value from the slope of the best-fit line, consistent with part (c): a=2(slope)≈0.56 m/s2 for the correct pair (the slope is 12a).

Also acceptable: A slope read from two points on the student's own best-fit line (a data point that lies on the line may be one of them); the value that follows from that slope earns the value point when it falls in the accepted range. For point 1: Accepted range for the value: 0.53 m/s2 to 0.59 m/s2 (5% either way of the guide's value, 0.56 m/s2). Also for point 1: With another pair from part (c): the value from that pair's own slope relation (for t2 against x, a=2slope; for x against t, a=2(slope)2).

Model answer

The slope of the best-fit line is (2.0−0.0) m(7.2−0.0) s2≈0.278 m/s2, found from the origin and the point (7.2 s2,2.0 m). Since slope =12a, a=2(0.278 m/s2)=0.56 m/s2.

(f) 1 point Calculation

  • 1 point: Correct value v=1.1 m/s for a=0.56 m/s2, consistent with part (e).

Also acceptable: For point 1: A value that rounds to the same answer to two or three significant figures, with correct units.

Model answer

From rest with a constant acceleration, v=at=(0.56 m/s2)(2.0 s)=1.1 m/s.

Question 4Qualitative/Quantitative Translation · Topic 1.3 · 8 points

(a) 3 points Claim and justification

  • 1 point: Claims more than three times.
  • 1 point: Notes that the same deceleration gives both trains' velocity-time graphs the same slope, with Train B's starting three times as high (the point needs both).
  • 1 point: Takes the stopping distance as the area of the triangle under each v-t graph and finds Train B's area 9 times as large, since its triangle is Train A's scaled up three times each way (the point needs both: the area as the distance and the factor 9).

Model answer

More than three times. Each train's velocity falls along a straight line to zero on a velocity-time graph, and the same deceleration gives both lines the same slope; Train B's line starts three times as high. The stopping distance is the area of the triangle under the line. Train B's triangle has the same shape as Train A's, scaled up three times, so its area, and its stopping distance, is 32=9 times Train A's.

(b) 3 points Derivation

  • 1 point: Uses the constant-acceleration equation without time, v2=v02+2aΔx.
  • 1 point: Substitutes a final speed of zero and an acceleration opposite the motion (the point needs both).
  • 1 point: Correct result d=v022a.

Also acceptable: Earns points 1 and 2: the work-energy theorem, −mad=0−12mv02 (the braking force ma does negative work that removes all the kinetic energy). Earns points 1 and 2: the route through the stopping time, t=v0a, then d=v0t−12at2 or the average speed v02 times t. For point 3: Any algebraically equivalent expression.

Model answer

Stopping uniformly, v2=v02−2ad with v=0, so d=v022a.

(c) 2 points Consistency check

  • 1 point: Answers yes, the expression is consistent with part (a): by d∝v02, three times the speed gives 9 times the distance (the point needs both: the answer and the factor 9 from d∝v02).
  • 1 point: Gives d→0 as a→∞ and judges the trend reasonable (the point needs both).

Note: Point 2 does not need a reason for the judgment, and a remark that no real brakes reach the limit does not cost it.

Also acceptable: Earns point 1: with a part (a) claim of three times or less than three times, the factor 9 and a statement that the expression does not agree with that claim; in every case point 1 is judged against the response's own part (a) claim and part (b) expression.

Model answer

Yes: d is proportional to v02, so three times the speed gives 9 times the distance, more than three times, as claimed in part (a). As a→∞, d→0: the harder the brakes act, the shorter the stop, so the trend is physically reasonable (no real brakes reach the limit itself).

What does the AP Physics 1 free response ask on Unit 1?

Questions about this set

Since 2025 the free-response section has four questions, one of each kind: Mathematical Routines (10 points: derive and calculate, then a claim with a justification), Translation Between Representations (12 points: draw a diagram, bar chart or graph, derive, and connect the representations), Experimental Design and Analysis (10 points: a procedure, a linear graph from data and a value from its slope), and Qualitative/Quantitative Translation (8 points: reason without equations, derive, then check that the two agree). This set has one of each, in that order.

Points are earned for specific pieces of work: starting from a correct principle, an expression in the requested symbols, a value with units, a sketch with the right shape, a claim with its physics reason. The scoring guide lists every point and what earns it, other acceptable methods, and a model answer for each part. On the exam the free response is half of the score.

Yes, throughout, as on the exam: a calculator and the AP Physics 1 equation sheet are allowed on both sections. Use g = 9.8 m/s², the value on the equation sheet.

No. Every question is original, written by Sigma Prep in the format of the exam. Before the set was published, an independent checker re-derived every expression, recomputed every value and its units, and read every graph and diagram back from the drawing.

The progress check is College Board's own end-of-unit quiz in AP Classroom, assigned by your teacher, and its free-response questions are not public: we do not have them, and Sigma Prep is not affiliated with College Board. This set is exam-style practice on the same unit: one question of each kind on the exam, with a scoring guide that says what earns each point. Write your answers in full, score them with the guide, then redo the parts that lost points.

Yes: the Unit 1 multiple-choice worksheet, and the mixed free-response set, which is laid out like a full free-response section with each question on a different unit.

AP is a registered trademark of the College Board, which was not involved in making this set and does not endorse it. All questions are original to Sigma Prep. Frozen 2026-11-19.