Every equation on the AP Physics 1 equation sheet, unit by unit: what each symbol means, when to use it, a worked example with numbers and the mistake students make most. Plus the 34 formulas the exam’s sheet leaves out but you still need. Free to print.
AP Physics 1 Formula SheetEvery equation on the exam’s reference sheet, explained with an example, plus the ones it leaves out.
Sigma Prep
Constants, conventions and geometry
Assumed unless the question says otherwisePartly on the sheet
No air resistance. Springs and strings are ideal. Fluids are ideal and fill their pipes. The reference frame is not accelerating. The sheet does not say what ideal means: an ideal spring or string is massless, a spring obeys Fs=−kΔx and a string does not stretch; an ideal fluid cannot be compressed, has no viscosity (no internal friction) and flows steadily.
Units and significant figuresPartly on the sheet
The sheet prints the SI unit symbols and the prefixes from tera to pico; the advice here is not on it. Work in SI units: kg, m, s, N, J, W, Pa. Convert grams, centimeters and minutes first. Give numerical answers with units, to the same number of significant figures as the data (usually two or three).
Gravity near EarthOn the exam sheet
g=9.8m/s2=9.8N/kgg is both the free-fall acceleration and the gravitational field strength at Earth's surface.Use it whenAny object near Earth's surface, unless the question gives another value.ExampleA dropped ball gains 9.8m/s of speed each second, so after 1.5s it falls at v=(9.8m/s2)(1.5s)=15m/s.Watch outTaking a=+9.8m/s2 for a ball on its way up with up as positive. With up positive, a=−9.8m/s2 for the whole flight, rising or falling.
Universal gravitational constantOn the exam sheet
G=6.67×10−11N⋅m2/kg2G sets the strength of gravity between any two masses.Use it whenGravitational force or energy between two objects, or g on another planet.ExampleTwo 52kg students 1.0m apart attract with F=(6.67×10−11N⋅m2/kg2)(52kg)(52kg)/(1.0m)2=1.8×10−7N, far too small to feel.Watch outMixing up G and g: G is the same everywhere; g depends on the planet and the distance from its center.
Atmospheric pressureOn the exam sheet
1atm=1.0×105Pa=1.0×105N/m2The pressure of the air at sea level.Use it whenThe surface pressure P0 of an open container, or the air pushing on a surface.ExampleAir pushes down on a 0.25m2 tabletop with F=PA=(1.0×105Pa)(0.25m2)=2.5×104N, and the air underneath pushes up just as hard.Watch outLeaving a pressure in atm or kPa in an SI calculation. Convert to pascals first: 1atm=1.0×105Pa.
Right trianglesOn the exam sheet
a2+b2=c2 · sinθ=ca · cosθ=cb · tanθ=bac is the hypotenuse, a the side opposite θ,b the side next to it. The sheet also lists sine, cosine and tangent of 0∘,30∘,37∘,45∘,53∘,60∘ and 90∘; the 37∘ and 53∘ angles come from a 3-4-5 triangle.Use it whenSplitting a force or velocity into components, or finding the angle of a ramp.ExampleA ramp 3.0m long rises 1.8m: sinθ=(1.8m)/(3.0m)=0.60, so θ=37∘.Watch outUsing sine where cosine belongs: the component next to the angle gets cosine.
CirclesOn the exam sheet
C=2πr · A=πr2 · s=rθC circumference, A area, s arc length for an angle θ in radians.Use it whenThe distance around a circular path, the area of a pipe or piston and the distance a point on a wheel's rim travels.ExampleA wheel of radius 0.30m turns through 2.0rad: a point on its rim travels s=(0.30m)(2.0rad)=0.60m.Watch outPutting θ in degrees: s=rθ needs radians.
Spheres and cylindersOn the exam sheet
Sphere: V=34πr3,S=4πr2 · Cylinder: V=πr2ℓ,S=2πrℓ+2πr2V volume, S surface area, r radius, ℓ length of the cylinder.Use it whenThe volume of fluid an object pushes aside (buoyancy), or a mass from a density.ExampleA ball of radius 0.10m has volume V=(4/3)π(0.10m)3=0.0042m3.Watch outUsing the diameter as r.
Rectangles, triangles and boxesOn the exam sheet
Rectangle: A=bh · Triangle: A=21bh · Box: V=ℓwhb base, h height, ℓ length, w width.Use it whenAreas under graphs (displacement, impulse, work) and volumes of blocks.ExampleA crate 0.50m by 0.40m by 0.20m has volume V=(0.50m)(0.40m)(0.20m)=0.040m3.Watch outForgetting the (1/2) for a triangle under a graph.
Velocity with constant accelerationOn the exam sheet
vx=vx0+axtvx velocity at time t(m/s),vx0 velocity at t=0,ax acceleration (m/s2),t time (s).Use it whenThe acceleration is constant and the problem gives or asks for a time.ExampleA cart moving at 2.0m/s speeds up at 1.5m/s2 for 4.0s: vx=2.0m/s+(1.5m/s2)(4.0s)=8.0m/s.Watch outUsing it when the problem gives a distance but no time. It has no displacement in it; use vx2=vx02+2ax(x−x0) then.
Position with constant accelerationOn the exam sheet
x=x0+vx0t+21axt2x position at time t(m),x0 position at t=0.Use it whenConstant acceleration, when you need a position or a displacement at a given time.ExampleA car starts from rest and speeds up at 2.5m/s2 for 6.0s: x−x0=(1/2)(2.5m/s2)(6.0s)2=45m.Watch outUsing it when the acceleration changes partway. Split the motion into stages with constant acceleration.
Velocity and displacement, no timeOn the exam sheet
vx2=vx02+2ax(x−x0)The same symbols; x−x0 is the displacement. For motion up and down, write y for x.Use it whenConstant acceleration when the problem neither gives nor asks for a time.ExampleA ball thrown straight up at 12m/s rises until it stops. With up positive, ay=−9.8m/s2 and 0=(12m/s)2+2(−9.8m/s2)(y−y0), so y−y0=7.3m.Watch outExpecting a different speed on the way down. At the same height the ball has the same speed going up and coming down: v2 depends only on the displacement, not on the direction.
Unit 1: not on the sheet, but you need it
Average velocity and accelerationNot on the sheet
vavg=ΔtΔx · aavg=ΔtΔvΔx displacement (m),Δv change in velocity (m/s),Δt the time it took (s).Use it whenAny motion, constant acceleration or not, when you only need an average over a time interval.ExampleA cyclist rides 150m east in 25s: vavg=(150m)/(25s)=6.0m/s east.Watch outUsing distance instead of displacement: one full lap of a track has an average velocity of zero.
Reading motion graphsNot on the sheet
Slope of the tangent to x vs. t is v · slope of the tangent to v vs. t is a area under v vs. t is Δx · area under a vs. t is ΔvOn a curved graph the slope at an instant is the slope of the tangent there; a chord between two points gives the average. Area means the area between the line and the time axis; area below the axis counts as negative.Use it whenAny question that gives a position, velocity or acceleration graph.ExampleA velocity graph rises in a straight line from 2.0m/s to 8.0m/s over 3.0s: the area, a trapezoid, is Δx=(1/2)(2.0m/s+8.0m/s)(3.0s)=15m.Watch outReading the height of a velocity graph as the position. The height is the velocity; the area under it is the displacement, so the position is x0 plus the area.
Launch at an angleNot on the sheet
vx0=v0cosθ · vy0=v0sinθ · ax=0,ay=−gv0 launch speed, θ launch angle above the horizontal, with up as positive (so ay=−g).Use it whenA projectile: split the launch velocity, then treat the horizontal and vertical motions separately with the same time.ExampleA ball launched at 22m/s and 53∘ has vx0=(22m/s)cos53∘=13m/s and vy0=(22m/s)sin53∘=18m/s.Watch outGiving the horizontal velocity an acceleration. With no air resistance only vy changes, by 9.8m/s each second.
Relative velocityNot on the sheet
vA rel C=vA rel B+vB rel CA velocity is measured in a reference frame: the velocity of A relative to the ground C is its velocity relative to B plus the velocity of B relative to the ground.Use it whenA person walking on a moving walkway, a boat on a river, a ball thrown from a moving cart.ExampleA traveler walks forward at 1.5m/s on a walkway moving at 2.0m/s: relative to the floor, v=1.5m/s+2.0m/s=3.5m/s.Watch outSubtracting in the wrong order. The velocity of A relative to B is vA rel C−vB rel C, not the other way round.
xcm=∑mi∑mixiEach object's mass mi times its position xi, added up, divided by the total mass.Use it whenLocating the center of mass of a system of objects, or finding where a bar with loads on it balances (count the bar too, its mass at its middle if uniform).ExampleA 2.0kg block at x=0 and a 6.0kg block at x=0.80m: xcm=[(2.0kg)(0m)+(6.0kg)(0.80m)]/(8.0kg)=0.60m.Watch outPutting the center of mass closer to the lighter object. For two unequal masses, it is always nearer the heavier one.
Newton's second lawOn the exam sheet
asys=msys∑F=msysFnetFnet the vector sum of the external forces on the system (N),msys its mass (kg).Use it whenAny time forces act: draw the free-body diagram, add the forces along each axis, then divide by the mass.ExampleA 12N push and 4.0N of friction act on a 2.0kg box: a=(12N−4.0N)/(2.0kg)=4.0m/s2.Watch outDividing by one object's mass when the forces accelerate two objects together, as when a push on one crate also moves a second crate in front of it. msys is the total mass of everything that accelerates.
Gravitational forceOn the exam sheet
∣Fg∣=Gr2m1m2m1 and m2 the two masses (kg),r the distance between their centers (m).Use it whenGravity between planets, moons and satellites, or between any two masses.ExampleA 520kg satellite 7.0×106m from Earth's center (Earth's mass 6.0×1024kg): Fg=(6.67×10−11N⋅m2/kg2)(6.0×1024kg)(520kg)/(7.0×106m)2=4200N.Watch outUsing the height above the surface for r. It is measured center to center.
FrictionOn the exam sheet
∣Ff∣≤∣μFN∣μ coefficient of friction (no units), FN normal force (N). Kinetic friction (sliding) equals μkFN; static friction is anything up to μsFN.Use it whenA surface pushes along a contact: sliding, or held still against a push.ExampleA 5.0kg crate slides on a level floor with μk=0.30: Ff=(0.30)(5.0kg)(9.8m/s2)=15N.Watch outWriting Ff=μsFN for a crate that is not about to slip. Static friction is only as large as it needs to be.
Spring forceOn the exam sheet
Fs=−kΔxk spring constant (N/m),Δx the stretch or compression from the spring's relaxed length (m). The minus sign: the force points back toward the relaxed length.Use it whenAn ideal spring (force proportional to stretch) pushes or pulls; also to find k from the slope of the straight part of a force vs. stretch graph.ExampleA spring with k=240N/m stretched 0.15m pulls back with Fs=(240N/m)(0.15m)=36N.Watch outUsing the spring's total length for Δx. Measure from the relaxed length.
Centripetal accelerationOn the exam sheet
ac=rv2v speed (m/s),r radius of the circle (m). It points toward the center.Use it whenAnything moving in a circle, at any speed: v2/r is the acceleration toward the center, and it is the whole acceleration only when the speed is constant.ExampleA car takes a curve of radius 48m at 15m/s: ac=(15m/s)2/(48m)=4.7m/s2, toward the center.Watch outAdding a separate “centripetal force” to the free-body diagram. It is the net of the real forces toward the center.
Unit 2: not on the sheet, but you need it
Translational equilibriumNot on the sheet
∑Fx=0 · ∑Fy=0When an object stays at rest (not just stopped for an instant) or moves at constant velocity, the net force on it is zero, so the forces balance in each direction. It is Newton's second law with a=0.Use it whenAn object at rest or moving at constant velocity: a hanging sign, a crate pushed at a steady speed, a block held still on a ramp.ExampleA rope at 37∘ above the horizontal pulls a 12kg crate at a steady speed across a level floor with a 45N tension. Along the floor, ∑Fx=0: friction is Ff=(45N)cos37∘=36N. Vertically, ∑Fy=0: FN+(45N)sin37∘=mg, so FN=(12kg)(9.8m/s2)−(45N)sin37∘=91N.Watch outSetting the net force to zero at a turning point, where the object is stopped for an instant. Its velocity is still changing there, so the net force is not zero.
WeightNot on the sheet
Fg=mgm mass (kg),g=9.8m/s2 near Earth.Use it whenEvery free-body diagram of an object near a planet's surface.ExampleA 3.0kg backpack weighs Fg=(3.0kg)(9.8m/s2)=29N.Watch outTreating mass and weight as the same: mass is in kilograms, weight is a force in newtons.
Normal force on a rampNot on the sheet
FN=mgcosθ · gravity's component along the ramp: Fg∥=mgsinθθ the ramp's angle above the horizontal. Holds when nothing else pushes into or pulls away from the ramp.Use it whenA block on an incline: tilt the axes to lie along and across the ramp.ExampleA 4.0kg block on a 30∘ ramp: FN=(4.0kg)(9.8m/s2)cos30∘=34N.Watch outWriting FN=mg on a slope, or when a rope or push has a component across the surface.
Gravity at a planet's surfaceNot on the sheet
g=R2GMM the planet's mass (kg),R its radius (m). Above the surface, use the distance r from the planet's center in place of R.Use it whenComparing g on different planets, or at different heights.ExampleA planet of mass 3.0×1023kg and radius 2.0×106m: g=(6.67×10−11N⋅m2/kg2)(3.0×1023kg)/(2.0×106m)2=5.0m/s2.Watch outForgetting the square: doubling the radius at the same mass gives a quarter of the gravity, not half.
Speed around a circleNot on the sheet
v=T2πrT the time for one trip around (s);T=1/f for f turns per second.Use it whenAn object moving in a circle at constant speed, when the question gives a period or a number of turns per second instead of a speed.ExampleA ride seat 6.0m from the axis goes around once every 4.0s: v=2π(6.0m)/(4.0s)=9.4m/s.Watch outUsing the time for half a turn as T, as when a seat goes from the bottom of a wheel to the top.
Circular orbit speedNot on the sheet
v=rGMFrom setting GMm/r2=mv2/r;M is the mass being orbited, m the satellite's mass.Use it whenA satellite or moon in a circular orbit.ExampleAround a planet of mass 3.0×1023kg at r=4.0×106m: v=(6.67×10−11N⋅m2/kg2)(3.0×1023kg)/(4.0×106m)=2200m/s.Watch outExpecting a heavier satellite to need a different speed. The satellite's own mass cancels.
Newton's third lawNot on the sheet
FA on B=−FB on ATwo objects that interact exert forces on each other that are equal in size and opposite in direction, on different objects.Use it whenInteraction pairs, and systems: forces between parts of a system cancel in the net force on the whole.ExampleA book pushes down on a table with 12N, so the table pushes up on the book with 12N.Watch outCalling the normal force and the weight a third-law pair. Both act on the same object; the weight's partner is the book's pull on Earth.
Apparent weight (scales and elevators)Not on the sheet
FN=m(g+a) (up positive)a the acceleration of the person or object, up positive. A scale reads not the weight mg but the normal force FN it pushes with.Use it whenA person on a scale in an elevator, or anything that rides with a system speeding up or slowing down vertically.ExampleA 4.0kg box on a scale in an elevator that speeds up going upward at 1.4m/s2: FN=(4.0kg)(9.8m/s2+1.4m/s2)=45N, more than the box's weight.Watch outWriting FN=m(g−a) for the example's elevator: 34N instead of 45N. With up positive, a=+1.4m/s2 there, so it adds to g.
K=21mv2K kinetic energy (J),m mass (kg),v speed (m/s).Use it whenAnything moving; energy questions compare K before and after.ExampleA 0.16kg ball at 24m/s: K=(1/2)(0.16kg)(24m/s)2=46J.Watch outTreating K as proportional to v: double the speed gives four times the kinetic energy.
Work done by a forceOn the exam sheet
W=F∥d=FdcosθF∥ the part of the force along the displacement (N),d the size of the displacement while the force acts, not the distance traveled along the path (m),θ angle between the force and the displacement.Use it whenA constant force acts on a moving object. A force perpendicular to the motion does no work. Sliding friction reverses with the motion, so its loss uses the distance slid (see Energy lost to friction).ExampleA 12N pull on a rope at 30∘ above the ground drags a sled 7.5m: W=(12N)(7.5m)cos30∘=78J.Watch outUsing the angle to the vertical. θ is the angle between the force and the direction of motion.
Work-energy theoremOn the exam sheet
ΔK=∑Wi=∑F∥,idiThe change in kinetic energy equals the total work by every force on the object.Use it whenForces act over a distance and you need a speed, without needing a time.ExampleA 2.0kg cart starts from rest and receives 36J of net work: (1/2)(2.0kg)v2=36J, so v=6.0m/s.Watch outCounting only the push. Friction does negative work and belongs in the sum.
Spring potential energyOn the exam sheet
Us=21k(Δx)2k spring constant (N/m),Δx the stretch or compression from the spring's relaxed length (m).Use it whenAn ideal spring launches, stops or bounces something.ExampleA spring with k=360N/m compressed 0.050m stores Us=(1/2)(360N/m)(0.050m)2=0.45J.Watch outMaking Us negative for a compression. (Δx)2 is positive either way, so a compressed spring stores energy too.
Gravitational potential energy (any distance from a planet)On the exam sheet
UG=−rGm1m2m1 and m2 the two masses (kg),r center-to-center distance (m). Zero when the objects are infinitely far apart.Use it whenOrbits, launches and other motion in which the distance from a planet's center changes a lot, at any distance outside the planet.ExampleThe 520kg satellite 7.0×106m from Earth's center: UG=−(6.67×10−11N⋅m2/kg2)(6.0×1024kg)(520kg)/(7.0×106m)=−3.0×1010J.Watch outDropping the minus sign. UG is negative and rises toward zero as r grows.
Gravitational potential energy near the surfaceOn the exam sheet
ΔUg=mgΔyΔy change in height (m), up positive.Use it whenLifting, dropping, ramps and hills near Earth's surface.ExampleA 62kg hiker climbs 120m: ΔUg=(62kg)(9.8m/s2)(120m)=7.3×104J.Watch outUsing the length of a ramp for Δy. Only the change in height counts.
Average powerOn the exam sheet
Pavg=ΔtW=ΔtΔEPavg average power (W=J/s).Use it whenHow fast work is done or energy is transferred.ExampleA winch does 430J of work in 6.0s: Pavg=(430J)/(6.0s)=72W.Watch outConfusing power with energy: a more powerful motor does the same work in less time, not more work.
Instantaneous powerOn the exam sheet
Pinst=F∥v=Fvcosθv the speed at that moment, θ the angle between the force and the velocity.Use it whenThe power a force delivers at one moment, from the speed at that moment (steady or changing).ExampleA 24N forward pull on a cart moving at 3.5m/s: Pinst=(24N)(3.5m/s)=84W.Watch outUsing the average speed when the question asks for the power at one moment.
Unit 3: not on the sheet, but you need it
Work from a graph, and conservative workNot on the sheet
W = area under F vs. x (any force) · Wcons=−ΔU (gravity or a spring only)For any force that changes along the path, the work is the area between the force-versus-position graph and the position axis. For motion in the +x-direction, area above the axis is positive work and area below it negative; for motion in the −x-direction both signs flip, since work is negative whenever the force points opposite the motion. Wcons is the work done by a conservative force, gravity or a spring, only: minus the change in the system's potential energy U. For a spring stretched from its relaxed length by Δx, the triangle under the graph of the pull on the spring, (1/2)k(Δx)2, is the work done on the spring; the spring's own work is −(1/2)k(Δx)2.Use it whenA question gives a force vs. position graph, or asks for the work done by gravity or a spring from a change in potential energy.ExampleA force grows steadily from zero to 24N as a cart moves 0.50m: the area, a triangle, is W=(1/2)(24N)(0.50m)=6.0J.Watch outAdding the area below the axis as positive work when the object moves in the +x-direction. There the force points opposite the motion, so the work is negative and that area is subtracted.
Conservation of mechanical energyNot on the sheet
Ki+Ui=Kf+Uf · sliding or falling from rest down a height h, not rolling: v=2ghHolds for a system that includes Earth (and any spring) when no friction, drag or outside push does work on it.Use it whenSpeeds at different heights, or how far a spring launches something.ExampleA sled starts from rest 5.0m above the bottom of an icy hill: v=2(9.8m/s2)(5.0m)=9.9m/s.Watch outUsing v=2gh for a ball or wheel that rolls: part of its energy goes into turning (see Kinetic energy of a rolling object, Unit 6).
Energy changed by outside workNot on the sheet
Wext=ΔK+ΔU+ΔEthWext the work done on the system by forces from outside it (J);ΔU the change in the system's potential energy, gravitational and spring; ΔEth the thermal energy friction produces inside the system.Use it whenAn outside push or pull does work on a system, or friction acts inside it, so the system's mechanical energy is not conserved.ExampleA worker pushes a crate from rest across a level floor, doing 150J of work on the crate-floor system, while friction turns 84J into thermal energy: ΔK=150J−84J=66J.Watch outCounting friction twice. Inside the system it appears once, as ΔEth, not also as outside work.
Energy lost to frictionNot on the sheet
ΔEth=FfdFf kinetic friction (N),d the distance slid (m).Use it whenEnergy questions with sliding friction: this much mechanical energy becomes thermal energy.ExampleA box slides 3.0m against 8.0N of friction: ΔEth=(8.0N)(3.0m)=24J.Watch outUsing the displacement of a round trip. Friction removes energy on every meter of the path.
p=mvp momentum (kg⋅m/s), a vector in the direction of the velocity.Use it whenCollisions, explosions and pushes between objects.ExampleA 0.40kg ball moving at 15m/s has p=(0.40kg)(15m/s)=6.0kg⋅m/s.Watch outIgnoring direction. A ball that bounces back has momentum of the opposite sign.
Force as change in momentumOn the exam sheet
Fnet=ΔtΔp=mΔtΔv=maThe net force equals the rate of change of momentum.Use it whenA collision or push with a known time: it gives the average net force over that time.ExampleA 0.50kg ball goes from +8.0m/s to −6.0m/s in 0.020s: the average net force is Fnet,avg=(0.50kg)(−6.0m/s−8.0m/s)/(0.020s)=−350N.Watch outUsing the final momentum for the change in momentum. Δp is the final momentum minus the initial momentum.
ImpulseOn the exam sheet
J=FavgΔt=ΔpJ impulse (N⋅s), also the area under a force vs. time graph.Use it whenA short, hard push: bats, airbags, collisions, landings.ExampleA bat pushes a ball with an average 850N for 0.0020s: J=(850N)(0.0020s)=1.7N⋅s.Watch outThinking a longer stop gives a smaller impulse. Stopping the same object from the same speed takes the same impulse; a longer time only makes the average force smaller.
Velocity of the center of massOn the exam sheet
vcm=∑mi∑pi=∑mi∑miviThe total momentum divided by the total mass.Use it whenThe motion of a whole system. It stays constant when the net external force on the system is zero; internal pushes and collisions cannot change it.ExampleA 2.0kg cart at 3.0m/s heads toward a 1.0kg cart at rest: vcm=(2.0kg)(3.0m/s)/(3.0kg)=2.0m/s, before and after they collide.Watch outTaking the plain average of the velocities: in the example, (3.0m/s+0)/2=1.5m/s. Each velocity counts in proportion to its object's mass.
Unit 4: not on the sheet, but you need it
Momentum is conservedNot on the sheet
m1v1+m2v2=m1v1′+m2v2′ · objects that stick: v′=m1+m2m1v1+m2v2v1,v2 velocities just before; primes mark velocities just after. Holds when the net outside force is zero (or the collision is too quick for it to matter).Use it whenCollisions, explosions and people or carts pushing apart.ExampleA 1400kg car at 12m/s hits a 1900kg car at rest and they lock together: v′=(1400kg)(12m/s)/(3300kg)=5.1m/s.Watch outConserving kinetic energy when objects stick together. Kinetic energy is not conserved when they stick (some becomes thermal energy); the total momentum is.
Elastic collisionsNot on the sheet
Elastic: total K before = total K after, as well as total momentumMost real collisions lose some kinetic energy (inelastic); an elastic one loses none.Use it whenDeciding whether a collision was elastic, or finding a speed when it is.ExampleA 1.0kg cart at 4.0m/s hits a 3.0kg cart at rest; after, they move at −2.0m/s and 2.0m/s.Kbefore=(1/2)(1.0kg)(4.0m/s)2=8.0J and Kafter=(1/2)(1.0kg)(2.0m/s)2+(1/2)(3.0kg)(2.0m/s)2=8.0J, the same: elastic.Watch outJudging from one object's speed alone. In the example the 1.0kg cart bounces back at only 2.0m/s, yet the collision is elastic: the 3.0kg cart carries off the rest of the kinetic energy.
Angular velocity with constant angular accelerationOn the exam sheet
ω=ω0+αtω angular velocity (rad/s),α angular acceleration (rad/s2).Use it whenConstant angular acceleration with a time, the rotational copy of v=v0+at.ExampleA fan starts from rest with α=3.0rad/s2: after 4.0s,ω=(3.0rad/s2)(4.0s)=12rad/s.Watch outTaking ω0=0 for a wheel that is already turning when the timing starts. ω0 is its angular velocity at t=0.
Angle turned with constant angular accelerationOn the exam sheet
θ=θ0+ω0t+21αt2θ angular position (rad).Use it whenConstant angular acceleration, when you need the angle turned in a given time.ExampleThe same fan turns Δθ=(1/2)(3.0rad/s2)(4.0s)2=24rad in those 4.0s.Watch outLeaving the answer in radians when the question asks for revolutions: divide by 2π.
Angular velocity and angle, no timeOn the exam sheet
ω2=ω02+2α(θ−θ0)The same symbols.Use it whenConstant angular acceleration with no time given or asked.ExampleA wheel spinning at 24rad/s slows at 4.0rad/s2 until it stops: with α=−4.0rad/s2,0=(24rad/s)2+2(−4.0rad/s2)Δθ, so Δθ=72rad.Watch outTaking the square root of a negative ω2. Then the wheel never turns that far: it stops before it gets there.
Speed of a point on a turning objectOn the exam sheet
v=rωr distance from the axis (m). Points farther out move faster.Use it whenLinking a wheel's rotation to the speed of its rim, a string that does not slip on it or an object rolling without slipping.ExampleA point 0.25m from the axle of a wheel turning at 12rad/s moves at v=(0.25m)(12rad/s)=3.0m/s.Watch outGiving every point of the turning object the same speed. They share ω, but v grows with r: a point halfway to the rim moves at half the rim's speed.
Tangential accelerationOn the exam sheet
aT=rαThe acceleration along the circle of a point at distance r, from speeding up or slowing down.Use it whenLinking a pulley's angular acceleration to the acceleration of a string or hanging block, when the string does not slip on the pulley.ExampleA pulley of radius 0.10m with α=15rad/s2: the string accelerates at aT=(0.10m)(15rad/s2)=1.5m/s2.Watch outConfusing it with the centripetal acceleration, which points to the center.
TorqueOn the exam sheet
τ=r⊥F=rFsinθr distance from the axis to where the force acts (m),θ angle between r and the force, r⊥ the lever arm, the perpendicular distance from the axis to the line of the force (rsinθ).Use it whenAnything that turns, balances or tips.ExampleA 32N push at right angles, 0.80m from a door's hinges: τ=(0.80m)(32N)sin90∘=26N⋅m.Watch outMeasuring r from the wrong point. It runs from the axis to where the force acts.
Rotational inertiaOn the exam sheet
I=∑miri2Each mass times the square of its distance from the axis. For solid shapes the question gives I.Use it whenObjects made of a few small masses, like balls on a light rod.ExampleTwo 0.50kg balls on a light rod, each 0.40m from the axis: I=2(0.50kg)(0.40m)2=0.16kg⋅m2.Watch outUsing the distance between the masses.
Parallel axis theoremOn the exam sheet
I′=Icm+Md2Icm the rotational inertia about an axis through the center of mass, M the object's total mass, I′ the rotational inertia about a new axis parallel to it, d the distance between the two axes.Use it whenAn object turns about an axis that is not through its center of mass.ExampleA rod with Icm=0.12kg⋅m2 and M=1.5kg, turned about an axis 0.40m from its center: I′=0.12kg⋅m2+(1.5kg)(0.40m)2=0.36kg⋅m2.Watch outSubtracting Md2. Of all parallel axes, the center-of-mass axis gives the smallest I.
Newton's second law for rotationOn the exam sheet
αsys=Isys∑τ=IsysτnetTorques that turn one way are positive, the other way negative.Use it whenPulleys with mass, wheels, doors: anything with a net torque, with the torques and I taken about the same axis (the one it turns about).ExampleA 6.0N⋅m net torque on a wheel with I=0.40kg⋅m2: α=(6.0N⋅m)/(0.40kg⋅m2)=15rad/s2.Watch outTaking the rope's tension as the hanging block's weight on a pulley with mass. While the block speeds up on its way down, the tension is less than mg.
Unit 5: not on the sheet, but you need it
Weight of an extended objectNot on the sheet
τ=Mgr⊥Gravity's force on a beam, ladder or plank acts at its center of mass; for a uniform object, at its middle. M the object's mass (kg),r⊥ the perpendicular distance from the axis to the vertical line through the center of mass (m); for a level uniform beam, the distance from the axis to its middle.Use it whenA beam, plank, ladder or trapdoor (hinged on a horizontal axis) whose own mass counts in a torque or balance question.ExampleA uniform 6.0kg plank 2.4m long is held level by a hinge at one end and a vertical rope at the other. Its weight acts at its middle, 1.2m from the hinge: τ=(6.0kg)(9.8m/s2)(1.2m)=71N⋅m.Watch outLeaving the beam's own weight out of the torque sum when its mass is given. It counts, acting at the center of mass.
EquilibriumNot on the sheet
∑F=0 and ∑τ=0An object in equilibrium (neither its velocity nor its angular velocity changes; for example, it is at rest) has no net force on it and no net torque about any point.Use it whenBalanced beams, seesaws, shelves, ladders and signs.ExampleA uniform seesaw is pivoted at its middle, so its own weight makes no torque about the pivot. A 32kg child sits 2.0m from the pivot; a 48kg child balances at d: (32kg)(9.8m/s2)(2.0m)=(48kg)(9.8m/s2)d, so d=1.3m.Watch outTrying to find a force from torques about a point it acts at: its torque there is zero. Put the pivot where a force you don't need acts.
Angular speed from a period or frequencyNot on the sheet
ω=T2π=2πfT time for one turn (s),f turns per second (Hz).Use it whenA question gives a period (the time for one turn), or revolutions per second or per minute.ExampleA turntable at 45 revolutions per minute has f=0.75Hz, so ω=2π(0.75Hz)=4.7rad/s.Watch outForgetting the 2π and taking ω=f.
Reading rotational motion graphsNot on the sheet
Slope of the tangent to θ vs. t is ω · slope of the tangent to ω vs. t is α area under ω vs. t is Δθ · area under α vs. t is ΔωThe same rules as for straight-line motion graphs, with angles for positions. Area below the time axis counts as negative.Use it whenAny question that gives an angular position, angular velocity or angular acceleration graph.ExampleAn angular velocity graph rises in a straight line from 2.0rad/s to 6.0rad/s over 4.0s: the area, a trapezoid, is Δθ=(1/2)(2.0rad/s+6.0rad/s)(4.0s)=16rad.Watch outReading the area under an angular acceleration graph as the angle turned. That area is the change in angular velocity Δω; the angle is the area under the ω vs. t graph.
K=21Iω2I rotational inertia (kg⋅m2),ω angular speed (rad/s).Use it whenAnything spinning, from flywheels to rolling balls; for a rolling object, add the (1/2)mv2 of its center (see Kinetic energy of a rolling object).ExampleA flywheel with I=0.20kg⋅m2 at 24rad/s: K=(1/2)(0.20kg⋅m2)(24rad/s)2=58J.Watch outUsing I about the wrong axis. It must be about the axis the object actually turns around; for an axis off the center of mass, use the parallel axis theorem.
Work done by a torqueOn the exam sheet
W=τΔθΔθ angle turned (rad).Use it whenA constant torque speeds up or slows down a wheel through some angle.ExampleA 15N⋅m torque turns a wheel through 6.2rad: W=(15N⋅m)(6.2rad)=93J.Watch outMultiplying the force, not the torque, by the angle. The torque is rF for a force tangent at radius r.
Angular momentum of a turning objectOn the exam sheet
L=IωL angular momentum (kg⋅m2/s).Use it whenHow much angular momentum a spinning object has.ExampleA disk with I=0.20kg⋅m2 at 15rad/s: L=(0.20kg⋅m2)(15rad/s)=3.0kg⋅m2/s.Watch outMixing up L=Iω with linear momentum mv: angular momentum uses the rotational inertia and the angular speed, and its unit is kg⋅m2/s, not kg⋅m/s.
Angular momentum of a moving pointOn the exam sheet
L=rmvsinθr distance from the axis (m),θ angle between r and the velocity.Use it whenA ball or person moving in a straight line that grabs or hits something that turns.ExampleA 0.20kg ball moving at 5.0m/s passes 0.60m from an axis, at right angles: L=(0.60m)(0.20kg)(5.0m/s)sin90∘=0.60kg⋅m2/s.Watch outThinking only spinning objects have angular momentum. A point moving past an axis has it too.
Angular impulseOn the exam sheet
ΔL=τΔtτ the net torque (N⋅m) over the time Δt(s).Use it whenA constant (or average) net torque acts for a known time, like friction slowing a wheel. For a torque that changes, ΔL is the area under the torque vs. time graph.ExampleA 2.0N⋅m friction torque acts on a spinning wheel for 3.0s; taking the spin direction as positive, ΔL=(−2.0N⋅m)(3.0s)=−6.0kg⋅m2/s.Watch outGiving a torque that opposes the spin a positive ΔL. With the spin direction positive, a torque against the spin gives a negative ΔL: the wheel loses angular momentum.
Rolling without slippingPartly on the sheet
Δxcm=rΔθ, so vcm=rω and acm=rαThe center moves one radius of distance for each radian the object turns. The sheet prints only Δxcm=rΔθ; the other two follow from its v=rω and aT=rα.Use it whenBalls, wheels and cylinders rolling without skidding.ExampleA wheel of radius 0.35m rolls through 4.0rad: its center moves Δxcm=(0.35m)(4.0rad)=1.4m.Watch outUsing it when the object skids. Then the center's speed and rω differ.
Unit 6: not on the sheet, but you need it
Angular momentum is conservedNot on the sheet
one body: I1ω1=I2ω2 · several: ∑Lbefore=∑LafterHolds when the net outside torque is zero. For several bodies add their angular momenta: Iω for a turning body, rmvsinθ for a moving point.Use it whenOne body that changes shape, such as a skater pulling in their arms; use the sum for several bodies, such as putty sticking to a spinning disk or a person walking on a turntable.ExampleA skater turning at 2.0rad/s with I=4.0kg⋅m2 pulls in to I=1.6kg⋅m2: ω=(4.0kg⋅m2)(2.0rad/s)/(1.6kg⋅m2)=5.0rad/s.Watch outKeeping I the same when the shape changes. Pulling in the arms lowers I, so ω rises to keep Iω the same.
Satellite in an elliptical orbitNot on the sheet
r1v1=r2v2 at the closest and farthest points · 21mv12−r1GMm=21mv22−r2GMmr is the distance from the center of the planet or star, v the satellite's speed there, m the satellite's mass, M the central mass. Gravity exerts no torque about the center, so the angular momentum is conserved; at the closest and farthest points it is rmv.Use it whenA satellite, moon or comet on an elliptical orbit: comparing its speeds or distances at its closest and farthest points with r1v1=r2v2, or at any two points with the energy equation. It moves fastest at its closest point.ExampleA satellite moves at 7600m/s at its closest point, 7.0×106m from the planet's center; its farthest point is 1.4×107m away: v2=(7.0×106m)(7600m/s)/(1.4×107m)=3800m/s.Watch outUsing v=GM/r at both points. That holds only on a circular orbit; on an ellipse the speeds follow from the angular momentum and K+UG.
Kinetic energy of a rolling objectNot on the sheet
K=21mv2+21Iω2, with v=rωMoving along plus turning: v the speed of the center (vcm=rω), and I about the center of mass. The question gives I for the shape, such as (2/5)mr2 for a solid ball.Use it whenObjects rolling without slipping, for example down a ramp: some of the energy goes into turning. When it starts from rest and rolls without slipping, static friction does no work, so mgh=(1/2)mv2+(1/2)Iω2, with h the height it drops down the ramp.ExampleA 2.0kg solid ball rolls at 3.0m/s. With I=(2/5)mr2 and ω=v/r, the turning energy is (1/2)[(2/5)mr2](v/r)2=(1/5)mv2 (the radius cancels): K=(1/2)(2.0kg)(3.0m/s)2+(1/5)(2.0kg)(3.0m/s)2=9.0J+3.6J=13J.Watch outGiving every shape the same share of turning energy. It depends on I: a hoop (I=mr2) has half its kinetic energy in turning, a solid ball (I=(2/5)mr2) only 2/7 of it.
T=f1T time for one full cycle (s),f cycles per second (Hz).Use it whenConverting between the two, or reading a period off a graph.ExampleA mass bouncing at f=2.5Hz has T=1/(2.5Hz)=0.40s.Watch outMixing up T and f when cycles are counted: 30 full cycles in 60s is f=0.50Hz, so T=2.0s, not 0.50s.
Period of a mass on a springOn the exam sheet
Ts=2πkmm the oscillating mass (kg),k spring constant (N/m). It does not depend on the amplitude.Use it whenA block on an ideal (light) spring with no friction, horizontal or hanging.ExampleA 0.50kg block on a spring with k=52N/m: Ts=2π(0.50kg)/(52N/m)=0.62s.Watch outExpecting a bigger amplitude to take longer. The period stays the same.
Period of a pendulumOn the exam sheet
Tp=2πgℓℓ length of the string to the bob's center (m). True for small swings.Use it whenA simple pendulum with small swings (a small angle), or finding g from a measured period.ExampleA 1.2m pendulum: Tp=2π(1.2m)/(9.8m/s2)=2.2s.Watch outExpecting twice the length to give twice the period. Tp grows as ℓ: it takes four times the length to double the period.
Position in simple harmonic motionOn the exam sheet
x=Acos(2πft) · x=Asin(2πft)A amplitude (m).2πft is in radians (calculator in radian mode).Use it whenWhere an oscillator in simple harmonic motion (a block on an ideal spring with no friction, or a pendulum with small swings) is at a given time.ExampleA=0.10m and f=0.50Hz, starting at x=A; at t=0.25s: x=(0.10m)cos[2π(0.50Hz)(0.25s)]=0.071m.Watch outUsing the cosine form for an object that starts at equilibrium. Cosine starts at x=A; from equilibrium, moving in the +x-direction, x=Asin(2πft).
Restoring force in simple harmonic motionPartly on the sheet
F=−kx · a=−mkxx the displacement from equilibrium, the point where the block would rest, and F the net (restoring) force on the block. The sheet does not print a=−(k/m)x. The force and the acceleration are proportional to x and point the opposite way, so they are greatest at x=±A and zero at equilibrium.Use it whenA block on an ideal spring with no friction, horizontal or hanging: finding where its acceleration is greatest or zero, or its value at a given position.ExampleA 0.50kg block on a 42N/m spring at x=0.10m: a=−[(42N/m)/(0.50kg)](0.10m)=−8.4m/s2.Watch outPutting the greatest acceleration at equilibrium, where the speed is greatest. There the force, and so the acceleration, is zero.
Unit 7: not on the sheet, but you need it
A hanging springNot on the sheet
kΔx0=mgΔx0 the stretch (m) from the spring's relaxed length to the new equilibrium, where the spring's pull balances the block's weight. The block oscillates about that point with the same period Ts=2πm/k as on a level surface.Use it whenA block hung on a vertical spring: how far it stretches the spring at rest, or the point it oscillates about.ExampleA 0.50kg block hangs at rest on a spring with k=49N/m: Δx0=mg/k=(0.50kg)(9.8m/s2)/(49N/m)=0.10m.Watch outMeasuring the oscillation from the spring's relaxed length. The block oscillates about the stretched equilibrium, so the amplitude and x are measured from there.
Greatest speed of an oscillatorNot on the sheet
vmax=2πfAReached at equilibrium, x=0.Use it whenHow fast an oscillator in simple harmonic motion moves through the middle: a block on an ideal spring with no friction, or a pendulum with small swings.ExampleA=0.050m at f=2.0Hz: vmax=2π(2.0Hz)(0.050m)=0.63m/s.Watch outUsing the swing angle for A with a pendulum. A is the bob's greatest distance from equilibrium, in meters.
Energy of a spring oscillatorNot on the sheet
E=21kA2=21kx2+21mv2=21mvmax2All spring energy at the turning points, all kinetic at equilibrium and shared between them at any position x in between.Use it whenSpeeds at different positions of a block on an ideal spring, with no friction.Examplek=84N/m,A=0.10m and m=0.50kg: E=(1/2)(84N/m)(0.10m)2=0.42J, all kinetic at equilibrium: (1/2)(0.50kg)vmax2=0.42J, so vmax=1.3m/s.Watch outCounting all of E as spring energy at a point between the turning points. There (1/2)kx2 is only part of E; the rest is kinetic.
Reading oscillation graphsNot on the sheet
Slope of the tangent to x vs. t is v · slope of the tangent to v vs. t is a from a turning point to equilibrium takes 4TOn an oscillator's position graph the speed is greatest where the graph crosses x=0 (it is steepest there) and zero at the turning points x=±A.Use it whenAny question that gives a position, velocity or acceleration graph of a mass on a spring or a pendulum.ExampleA position graph falls from its highest point to equilibrium in 0.45s: that is a quarter cycle, so T=4(0.45s)=1.8s.Watch outReading the amplitude as the height from a peak to a trough. That is twice the amplitude; A runs from equilibrium to a peak.
ρ=Vmρ density (kg/m3). Water is 1000kg/m3.Use it whenFloating and sinking, and masses of fluid.ExampleA 2.7kg block with volume 0.0010m3: ρ=(2.7kg)/(0.0010m3)=2700kg/m3.Watch outUsing the material's density for a hollow object, such as a steel ship. Whether it floats depends on its average density: the total mass over the total volume, the air inside included.
PressureOn the exam sheet
P=AF⊥F⊥ force at right angles to the surface (N),A area (m2);P in Pa.Use it whenA force spread over an area, or the force a fluid pushes with.ExampleA 640N person stands on snowshoes covering 0.040m2: P=(640N)/(0.040m2)=1.6×104Pa.Watch outLeaving the area in cm2: 1cm2=10−4m2.
Pressure at a depthOn the exam sheet
P=P0+ρgh · gauge pressure: Pgauge=ρghP0 pressure at the surface (atmospheric for an open container), h depth below the surface (m). Gauge pressure is the part above P0.Use it whenA fluid at rest with uniform density: divers, tanks, dams and U-tubes. Pressure grows with depth.Example12m down in a lake (ρ=1000kg/m3,P0=1.0×105Pa): P=1.0×105Pa+(1000kg/m3)(9.8m/s2)(12m)=2.2×105Pa.Watch outMeasuring h up from the bottom. It is the depth below the fluid's surface.
Buoyant forceOn the exam sheet
Fb=ρVgρ the fluid's density, V the volume of fluid pushed aside (the part of the object under the surface).Use it whenAnything floating, sinking or hanging in a fluid.ExampleA rock of volume 0.0015m3 fully under water: Fb=(1000kg/m3)(0.0015m3)(9.8m/s2)=15N.Watch outUsing the object's density. Buoyancy depends on the fluid's density.
ContinuityOn the exam sheet
A1v1=A2v2A the pipe's cross-section area (m2),v the flow speed there (m/s).Use it whenAn incompressible fluid in steady flow through a pipe that narrows or widens: the same volume passes each point every second.ExampleWater at 2.0m/s in a pipe of area 3.0×10−4m2 enters a nozzle of area 1.0×10−4m2: v2=(3.0×10−4m2)(2.0m/s)/(1.0×10−4m2)=6.0m/s.Watch outUsing the radius ratio instead of the area ratio. Half the radius is a quarter of the area.
Bernoulli's equationOn the exam sheet
P1+ρgy1+21ρv12=P2+ρgy2+21ρv22Energy per volume along a flow: pressure, height y and speed at two points.Use it whenAn ideal fluid in steady flow that speeds up, slows down or changes height.ExampleWater flows through a level pipe and speeds up from 2.0m/s to 3.0m/s: P1−P2=(1/2)(1000kg/m3)[(3.0m/s)2−(2.0m/s)2]=2500Pa.Watch outExpecting the faster part to have higher pressure. At the same height it has lower pressure.
Unit 8: not on the sheet, but you need it
Hydraulic press (Pascal's principle)Not on the sheet
A1F1=A2F2A pressure added to an enclosed fluid reaches every part of it. F1 the push on the piston of area A1(m2),F2 the force the fluid exerts on the piston of area A2, with both pistons at the same height.Use it whenA hydraulic lift, press or brake.ExampleA 120N push on a piston of area 0.0030m2, in a lift whose large piston has area 0.12m2: F2=(120N)(0.12m2)/(0.0030m2)=4800N.Watch outExpecting the press to give out more work than it takes in. The large piston moves only A1/A2 as far as the small one, so F2d2=F1d1.
Volume flow rateNot on the sheet
Q=Av=ΔtVQ volume per second (m3/s);V the volume delivered (m3) in a time Δt(s).Use it whenHow fast a hose or pipe fills a tank.ExampleA hose opening of 2.0×10−4m2 with water at 5.0m/s: Q=Av=(2.0×10−4m2)(5.0m/s)=0.0010m3/s, a liter each second.Watch outUsing the speed alone. A wider pipe at the same speed delivers more.
Speed out of a hole in a tankNot on the sheet
v=2ghFrom Bernoulli's equation for an open tank. Here h is the depth of the hole below the water's surface.Use it whenWater leaving a small hole in an open tank.ExampleA hole 0.80m below the surface: v=2(9.8m/s2)(0.80m)=4.0m/s.Watch outUsing it for a sealed or pumped tank. It holds when the water's surface and the hole are both open to the air.
Floating objectsNot on the sheet
Fb=mg · fraction under the surface =ρfluidρobjectA floating object pushes aside its own weight of fluid. ρobject is the object's average density, its mass over its whole volume (for a boat, the hull and the air inside it).Use it whenHow deep a block, boat or ice cube floats.ExampleWood of density 640kg/m3 floats in water (1000kg/m3) with (640kg/m3)/(1000kg/m3)=0.64 of its volume under the surface.Watch outTurning the fraction upside down, ρfluid/ρobject, which gives more than 1.
Apparent weight in a fluidNot on the sheet
Fscale=mg−FbWhat a scale or string holds up when the object hangs under the surface.Use it whenWeighing an object in water, or a string holding a sunken object.ExampleA 3.0kg rock of volume 0.0012m3 hanging in water (1000kg/m3): Fscale=(3.0kg)(9.8m/s2)−(1000kg/m3)(0.0012m3)(9.8m/s2)=18N.Watch outAdding Fb to mg. The buoyant force pushes up, so the scale holds up less than the weight.
Do you get a formula sheet on the AP Physics 1 exam?
Yes. You get College Board’s equation sheet for the whole exam, so you do not have to memorize the equations. You do have to know which one fits a problem and what its symbols mean there.
The sheet has no instructions. It lists each equation with a key to the letters, but not when it applies: the three motion equations hold only while the acceleration is constant.
Some of what you need is not on it. Conservation of energy, momentum and angular momentum are not written out, and neither are weight, the normal force on a ramp or the speed out of a tank.
Free response grades the start. A derivation earns its first point for the equation you begin from, so name the principle before the numbers.
Yes. College Board gives you an equation sheet, called the exam reference information, for the whole exam, multiple choice and free response. It lists constants such as g, the equations for each unit, and geometry and trigonometry. It does not say when to use each equation or what the symbols stand for in a given problem, which is what this sheet adds.
Use 9.8 m/s². The equation sheet gives g = 9.8 m/s² (the same number as 9.8 N/kg, the gravitational field strength at Earth’s surface), and the 2025 and 2026 scoring guidelines plug in 9.8. Use 10 only when a question tells you to.
Mostly the statements that connect the equations, and a few results you derive from them. This sheet lists 34 that are not on it: average velocity and acceleration; reading motion graphs; launch at an angle; relative velocity; translational equilibrium; weight; normal force on a ramp; gravity at a planet's surface; speed around a circle; circular orbit speed; newton's third law; apparent weight (scales and elevators); work from a graph, and conservative work; conservation of mechanical energy; energy changed by outside work; energy lost to friction; momentum is conserved; elastic collisions; weight of an extended object; equilibrium; angular speed from a period or frequency; reading rotational motion graphs; angular momentum is conserved; satellite in an elliptical orbit; kinetic energy of a rolling object; a hanging spring; greatest speed of an oscillator; energy of a spring oscillator; reading oscillation graphs; hydraulic press (pascal's principle); volume flow rate; speed out of a hole in a tank; floating objects; apparent weight in a fluid.
Yes, on both sections. A four-function, scientific or graphing calculator is allowed, and Bluebook has a built-in Desmos calculator. Keep it in radian mode for simple harmonic motion, where the angle 2πft is in radians.
Yes. Download the PDF or print it from the page. There is no account and no sign-up, and you can hand out as many copies as you like.
AP is a registered trademark of the College Board, which was not involved in making this sheet and does not endorse it. Written by Sigma Prep; it is not the College Board equation sheet.