Worksheets · AP Calculus BC · Unit 10

AP Calculus BC Unit 10 FRQ Practice: Sequences and Series

Three exam-style free-response questions on series convergence, power series, Taylor polynomials and error bounds, all without a calculator. Each is scored out of 9, with a scoring guide and a printable PDF with room to write, free to use in class. Good practice before the Unit 10 Progress Check in AP Classroom. Multiple choice for this unit: Unit 10 worksheet.

Sigma Prep · sigmaprep.io/worksheets/ap-calculus-bc

Name

AP Calculus BC Unit 10 Free Response: Sequences and Series

Date Version A

Directions: Show your work in the space under each part: the setup, the values you use and your reasoning. A justification needs a mathematical reason, with the conditions of any theorem or test you use checked. An answer with no supporting work may earn no credit. Give decimal answers correct to three decimal places unless a part says otherwise. Each question is worth 9 points. Unless a question says otherwise, the domain of a function f is every real number x for which f(x) is a real number.

Part B: No calculator is allowed.

Questions 1–3
  1. 1.
    For each x in its interval of convergence, f(x) equals ∑n=1∞nxn4n, a power series that is the Maclaurin series of f.
    1. (a)
      Apply the ratio test to the Maclaurin series of f, and find its radius of convergence.
    2. (b)
      The derivative f′(x) has a power series too. Write its first three nonzero terms, then its general term.
    1. (c)
      With g(x)=∫0xf(t) dt, integrate term by term to find the Maclaurin series of g: give its first four nonzero terms and its general term.
  2. 2.
    For all real x, g has derivatives of every order; on its interval of convergence, its Maclaurin series is g(x)=∑n=0∞(−1)nxn3n+2n2.
    1. (a)
      Use the Maclaurin series of g to find g′(0) and g′′(0).
    2. (b)
      Apply the limit comparison test, comparing with ∑n=0∞13n, to show that the series for g(1) is absolutely convergent.
    1. (c)
      Use the ratio test to find the radius of convergence of the Maclaurin series of g, showing the ratio of consecutive terms and its limit.
    2. (d)
      Approximate g(1) by the sum of the first two terms of its series. Use the alternating series error bound to find an upper bound on how far off this estimate can be. Show that the conditions for using the alternating series error bound are met.
  3. 3.
    The function f is twice differentiable for x>0, and f(1)=−2. The table lists selected values of f′ and f′′.
    x11.11.21.31.4f′(x)−4−3.55−2.95−2.35−2.25f′′(x)3666−4
    1. (a)
      Find the tangent line to the graph of f at x=1, and use it to estimate f(1.4).
    2. (b)
      Approximate ∫11.4f′(x) dx by a midpoint Riemann sum on two subintervals of the same length, with values from the table. Then use the result to estimate f(1.4). Show the computations that lead to your answer.
    1. (c)
      Starting at x=1, approximate f(1.2) by Euler's method with two steps of equal size, taking the slopes f′(x) from the table. Show the computations that lead to your answer.
    2. (d)
      Write P2(x), the Taylor polynomial of degree 2 of f centered at x=1, and use it to estimate f(1.4).

      End of Version A

Free AP Calculus BC worksheets at sigmaprep.io/worksheets/ap-calculus-bcOriginal questions written by Sigma Prep. AP is a registered trademark of the College Board, which is not affiliated with this sheet.

Scoring guide · Version A

Question 1A given power series: its radius, and series built from it · no calculator · 9 points

(a) 3 points Radius of convergence · Topic 10.13

  • 1 point: sets up the ratio
  • 1 point: computes the limit of the ratio
  • 1 point: the radius of convergence, 4

Solution

  1. With an=nxn4n, ∣an+1an∣=n+1n⋅∣x∣4, and its limit as n→∞ is ∣x∣4.
  2. The series converges when ∣x∣4<1, that is ∣x∣<4, so the radius of convergence is 4.

(b) 3 points Series of a derivative, term by term · Topic 10.15

  • 1 point: differentiates term by term
  • 1 point: the first three nonzero terms
  • 1 point: the general term

Solution

  1. Differentiate term by term:
    f(x)=x4+x28+3x364+⋯, and the derivative of k xm is km xm−1.
  2. f′(x)=14+x4+9x264+⋯.
  3. In sigma form, f′(x)=∑n=1∞n2xn−14n.

(c) 3 points Series of an integral, term by term · Topic 10.15

  • 1 point: integrates term by term
  • 1 point: the first four nonzero terms
  • 1 point: the general term

Solution

  1. Integrate term by term from 0 to x: each k xm becomes km+1 xm+1.
  2. g(x)=x28+x324+3x4256+x5320+⋯.
  3. In sigma form, g(x)=∑n=1∞nxn+1(n+1)⋅4n.

Question 2A given series: derivatives at 0, limit comparison, radius, error bound · no calculator · 9 points

(a) 2 points Derivative read from a Taylor polynomial · Topic 10.11

  • 1 point: g′(0)=−15
  • 1 point: g′′(0)=217, with the factor 2!

Solution

  1. The coefficient of xn in the Maclaurin series of g is g(n)(0)n!; here it is (−1)n3n+2n2.
  2. So g′(0)=1!⋅−15=−15 and g′′(0)=2!⋅117=217.

(b) 2 points Limit comparison test · Topic 10.6

  • 1 point: the limit 1, finite and positive
  • 1 point: the geometric comparison series converges, so g(1) converges absolutely

Solution

  1. g(1)=∑n=0∞(−1)n3n+2n2, and its absolute values are 13n+2n2.
  2. lim⁡n→∞1/(3n+2n2)1/3n=lim⁡n→∞3n3n+2n2=1, which is finite and positive.
  3. ∑n=0∞13n is a geometric series with ratio 13, which converges, so the series of absolute values converges, and the series for g(1) is one that converges absolutely.

(c) 3 points Radius of convergence · Topic 10.13

  • 1 point: sets up the ratio
  • 1 point: the limit of the ratio
  • 1 point: the radius, 3

Solution

  1. ∣an+1an∣=3n+2n23n+1+2(n+1)2∣x∣, and its limit as n→∞ is ∣x∣3.
  2. The series converges when ∣x∣3<1, so the radius of convergence is 3.

(d) 2 points Alternating series error bound · Topic 10.10

  • 1 point: the approximation, 45
  • 1 point: the bound, 117, with the alternating series error bound named and its conditions checked: the terms alternate in sign, and their absolute values decrease to 0

    Also acceptable: The bound given as a decimal, ≈0.059, with the same conditions checked, earns the point.

Solution

  1. g(1)≈1−15=45.
  2. The terms of the series for g(1) are (−1)n3n+2n2: they alternate in sign, and their absolute values 13n+2n2 decrease to 0, since 3n+2n2 increases with n and grows without bound. So the error of the sum of the first two terms is at most the third term in absolute value, 117.

Question 3A table of f′ and f″: work from the table, a Taylor polynomial · no calculator · 9 points

(a) 2 points Tangent line or tangent-line approximation · Topic 4.6

  • 1 point: the tangent line
  • 1 point: the approximation, −3.6

Solution

  1. The tangent line at x=1 is y=−2−4(x−1).
  2. At x=1.4 it gives f(1.4)≈−3.6.

(b) 3 points Riemann sum · Topic 6.2

  • 1 point: the midpoint sum
  • 1 point: its value, −1.18
  • 1 point: f(1.4)≈−3.18

Solution

  1. Midpoints of [1,1.2] and [1.2,1.4] are 1.1 and 1.3: ∫11.4f′(x) dx≈0.2(−3.55−2.35)=−1.18.
  2. f(1.4)=f(1)+∫11.4f′(x) dx≈−2+(−1.18)=−3.18.

(c) 2 points Euler's method · Topic 7.5

  • 1 point: Euler's method with two steps
  • 1 point: the approximation, −2.755

Solution

  1. f(1.1)≈f(1)+0.1⋅f′(1)=−2+0.1(−4)=−2.4.
  2. f(1.2)≈−2.4+0.1(−3.55)=−2.755.

(d) 2 points Taylor polynomial · Topic 10.11

  • 1 point: the polynomial, −2−4(x−1)+32(x−1)2
  • 1 point: the approximation, −3.36

Solution

  1. P2(x)=f(1)+f′(1)(x−1)+f′′(1)2(x−1)2=−2−4(x−1)+32(x−1)2.
  2. f(1.4)≈P2(1.4)=−3.36.

What does the AP Calculus BC free response ask on Unit 10?

More than any other unit: Unit 10 is about 18% of the AP Calculus BC free-response points since 2012.

This set has 3 questions in that mix, all without a calculator (all Unit 10 free-response points are in the no-calculator section), each scored out of 9 with a scoring guide.

Counted from the official AP Calculus BC free-response questions, 2012–2026. No official question is reproduced here.

AP Calculus BC Unit 10 free-response questions by share of exam points

Kinds of free-response question on this set and their share of official AP Calculus BC free-response points, 2012–2026
QuestionQuestions on this setShare of Unit 10 free-response pointsShare of all free-response points (its kind)Last on the exam (its kind)
A given power series: its radius, and series built from itNo calculator1 of 310%11%2026
A table of f′ and f″: work from the table, a Taylor polynomialNo calculator1 of 31%1%2012
A given series: derivatives at 0, limit comparison, radius, error boundNo calculator1 of 310%11%2026

A free-response part counts toward a kind of question by its points on the main BC exams 2012–2026; a unit’s share counts the parts whose main skill is in that unit, split evenly between the questions of that kind on the set’s list. Shares of all points are of the 756 BC free-response points on those exams.

Questions about this free-response set

Unit 10, Infinite Sequences and Series, is BC only. Its 15 topics in the College Board's course description: convergent and divergent series; geometric series; the nth term, integral, p-series, comparison, alternating series and ratio tests; absolute and conditional convergence; the alternating series and Lagrange error bounds; Taylor polynomials; the radius and interval of convergence of a power series; and Taylor, Maclaurin and other power series for a function. The course description weights the unit at 15–20% of the BC multiple-choice section.

Each question is worth 9 points, spread over its three or four parts. Points are earned for specific pieces of work: a setup, an antiderivative, a value with its units, a conclusion with its reason. The scoring guide lists every point and what earns it, then a worked solution for each part. On the exam the six free-response questions are half of the score.

Only where the exam allows one. On this set, all three are in Part B, without a calculator, as almost every Unit 10 free-response part on the BC exam has been.

We tagged every BC free-response part from 2012 to 2026 by the skill it tests and the kind of question it is in. The Unit 10 kinds of question the BC exam leans on most get the most questions here, each in its own context with its own parts, and no task is asked twice on the set, except that a unit built on one kind of question (series) repeats a task where every question of that kind asks it.

No. Every question here is original, written by Sigma Prep in the style of the exam: the settings, functions, numbers and wording are our own, and no official question or scoring guideline is copied or reworded. Every value and statement in the scoring guide was checked by an independent computer-algebra check before the set was published.

Yes. Open it under the questions, or download the PDF, which prints the questions with room to write and then the scoring guide on its own pages. There is also a PDF without the scoring guide to hand out.

AP is a registered trademark of the College Board, which was not involved in making these questions and does not endorse them. All questions and scoring guides are original to Sigma Prep. Frozen 2026-11-11.