Worksheets · AP Calculus BC

AP Calculus BC Unit 10 Worksheet: Sequences and Series

20 exam-style multiple-choice questions on series convergence, power series, Taylor polynomials and error bounds, free to use in class. Good practice before the Unit 10 Progress Check in AP Classroom. Free response for this unit: Unit 10 FRQ set.

Sigma Prep · sigmaprep.io/worksheets/ap-calculus-bc

Name

AP Calculus BC Unit 10: Sequences and Series

Date Version A

Directions: Work each problem in the space below it, then choose the best of the four answer choices. Unless a question says otherwise, the domain of a function f is every real number x for which f(x) is a real number.

Part A: No calculator is allowed.

Questions 1–18
  1. If f(0)=2 and f′(x)=11−3x2, which choice starts the Maclaurin series of f?
    1. (A)2+x+x3+⋯
    2. (B)2+x2+3x42+⋯
    3. (C)x+x3+9x55+⋯
    4. (D)2+x+3x32+⋯
  2. Add up the infinite series 3+32+34+⋯+3 ⁣(12)n+⋯. The result is
    1. (A)3
    2. (B)2
    3. (C)1
    4. (D)6
  3. Estimate ln⁡(1.2) with P2, the Maclaurin polynomial of degree 2 for f(x)=ln⁡(1+x).
    1. (A)−0.22
    2. (B)0.16
    3. (C)0.18
    4. (D)0.20
  4. Of the series I, II, and III, which converge?
    I. ∑n=2∞1nln⁡n
    II. ∑n=1∞nn2+5
    III. ∑n=1∞5n4n+1
    1. (A)I and II only
    2. (B)None
    3. (C)III only
    4. (D)II only
  5. The series ∑n=1∞1n3p+2 converges for exactly which values of p?
    1. (A)p≥−13
    2. (B)p<−13
    3. (C)p>−13
    4. (D)p>−23
  6. Exactly one series below is conditionally convergent. Which is it?
    1. (A)∑n=1∞(−1)nnn+2
    2. (B)∑n=1∞13n+2
    3. (C)∑n=1∞(−1)n+1n+1
    4. (D)∑n=1∞2(−1)nn2
  7. Suppose ∑n=0∞anxn, a power series, is convergent when x=3 but divergent when x=−5. Which of the following must be true?
    I. The series diverges at x=6.
    II. The series converges at x=−3.
    III. The radius of convergence is 3.
    1. (A)I and II only
    2. (B)I, II, and III
    3. (C)I and III only
    4. (D)I only
  8. Which function has the Maclaurin series ∑n=0∞(−1)nx2n(2n+1)! (for all real x≠0)?
    1. (A)sin⁡x
    2. (B)xsin⁡x
    3. (C)cos⁡x
    4. (D)sin⁡xx
  9. Find every x at which ∑n=1∞n!(x−1)n3n converges.
    1. (A)−2<x<4
    2. (B)all real numbers x
    3. (C)−12<x<52
    4. (D)x=1
  10. The polynomial 5+6(x−2)+2(x−2)2+12(x−2)3−13(x−2)4+2(x−2)5 is P5 for a function f, centered at x=2. What does f′′′(2) equal?
    1. (A)3
    2. (B)32
    3. (C)12
    4. (D)112
  11. In the Maclaurin series of arctan⁡(3x3), the term with x15 has what coefficient?
    1. (A)2435
    2. (B)35
    3. (C)−47829695
    4. (D)243
  12. A function f has f(2)=4, f′(2)=5 and f′′(2)=−2. If g(x)=∫2xf(t) dt, which is the third-degree Taylor polynomial of g centered at x=2?
    1. (A)2(x−2)+56(x−2)2−112(x−2)3
    2. (B)4(x−2)+52(x−2)2−13(x−2)3
    3. (C)4+5(x−2)−(x−2)2
    4. (D)4(x−2)+5(x−2)2−2(x−2)3
  13. The ratio test is applied to ∑n=1∞n4n7n, with L=lim⁡n→∞∣an+1an∣. Which is correct?
    1. (A)L=1, so the test tells nothing
    2. (B)L=47, so the series converges
    3. (C)L=74, so the series diverges
    4. (D)L=47, so the series diverges
  14. Suppose 0<an≤bn for every n≥1. Which one of these statements has to hold?
    1. (A)A divergent ∑bn forces ∑(−1)nan to diverge.
    2. (B)Whenever ∑an converges, ∑bn converges too.
    3. (C)If ∑an converges, the terms bn must approach 0.
    4. (D)Whenever ∑bn converges, ∑(−1)nan converges too.
  15. Before using the alternating series test on ∑n=1∞(−1)n4n4n+1, check its conditions. Which of these statements hold?
    I. The terms change sign from each term to the next.
    II. The sizes of the terms never increase.
    III. The terms approach 0.
    1. (A)I and II only
    2. (B)I and III only
    3. (C)I only
    4. (D)None
  16. A function g is defined by g(x)=∑n=0∞(3x+1)n wherever the series converges. Which of the following is the domain of g?
    1. (A)−23≤x≤0
    2. (B)−23<x<0
    3. (C)−43<x<−23
    4. (D)−103<x<83
  17. The terms of a series are an=f(n), where f is positive, continuous and decreasing on [1,∞), and ∑n=1∞an=S. Which statement is necessarily true?
    1. (A)∫1∞f(x) dx<S
    2. (B)∫1∞f(x) dx>S
    3. (C)lim⁡n→∞f(n)=S
    4. (D)∫1∞f(x) dx diverges.
  18. The sequence {an} is defined by an=3n2+5n+27n2+8. What is lim⁡n→∞an?
    1. (A)37
    2. (B)73
    3. (C)The sequence diverges.
    4. (D)57

Part B: A graphing calculator is allowed.

Questions 19–20
  1. To estimate the sum S of ∑n=1∞(−1)n+1ln⁡(n+1)n2 with an error less than 0.0025, the alternating series error bound requires adding at least how many terms?
    1. (A)37
    2. (B)38
    3. (C)39
    4. (D)56
  2. We know f(3)(x)=ln⁡ ⁣(x2+2). The value f(1) is estimated by P2(1), with P2 the Maclaurin polynomial of degree 2 for f. What bound on the error does the Lagrange error bound give?
    1. (A)0.549
    2. (B)1.099
    3. (C)0.183
    4. (D)0.116

    End of Version A

Answer key · Version A

12345678910
ADCBCCDDDA
10.1510.210.1110.110.510.910.1310.1410.1310.11
11121314151617181920
ABBDCBAABC
10.1410.1110.810.610.710.1310.410.110.1010.12

The second row is the correct letter; the third is the course topic each question tests.

Free AP Calculus BC worksheets at sigmaprep.io/worksheets/ap-calculus-bcOriginal questions written by Sigma Prep. AP is a registered trademark of the College Board, which is not affiliated with this sheet.

What does the AP Calculus BC exam ask on Unit 10?

The second most of any unit: Unit 10 was 54 of the 315 official multiple-choice questions on the seven 2012–2018 BC practice exams (17.1%).

This worksheet has 20 questions in that mix: Part A (18) without a calculator and Part B (2) with one; the exam put 28% of its official Unit 10 multiple choice in the calculator section.

Counted from the official AP Calculus BC exams: multiple choice from 17 exams, 1969–2018, free response 2012–2026. No official question is reproduced here.

AP Calculus BC Unit 10 question types: how often the exam asks each

Official AP Calculus BC multiple-choice questions by question type, Unit 10 (Infinite Sequences and Series), and how many are on this worksheet
Question typeOn this worksheetOfficial questions, 1969–2018Exams it was on (of 17)On the 2012–2018 practice exams
Which series converge? (mixed tests)Topic 10.1112105
Sequences and partial sumsTopic 10.11442
Geometric seriesTopic 10.2112126
Integral testTopic 10.41220
p-series and harmonic seriesTopic 10.51441
Comparison testsTopic 10.61665
Alternating series testTopic 10.71222
Ratio testTopic 10.81221
Absolute or conditional convergenceTopic 10.91111
Alternating series error boundTopic 10.101443
Taylor polynomial from derivatives or a functionTopic 10.111663
Approximate a value with a Taylor polynomialTopic 10.111110
Derivative value from a Taylor coefficientTopic 10.111553
Lagrange error boundTopic 10.121221
Radius and interval of convergenceTopic 10.133201510
Series from known Maclaurin seriesTopic 10.1411295
Recognize the sum of a seriesTopic 10.141773
Differentiate or integrate a power seriesTopic 10.151663

Counts are of official multiple-choice questions whose main topic is that kind, on 17 College Board BC exams 1969–2018 (released exams from 1969 to 2008 and the 2008 and 2012–2018 practice exams). No official multiple-choice questions after 2018 are public. Left out: nth term test.

Questions about this worksheet

Unit 10, Infinite Sequences and Series, is BC only. Its 15 topics in the College Board's course description: convergent and divergent series; geometric series; the nth term, integral, p-series, comparison, alternating series and ratio tests; absolute and conditional convergence; the alternating series and Lagrange error bounds; Taylor polynomials; the radius and interval of convergence of a power series; and Taylor, Maclaurin and other power series for a function. The course description weights the unit at 15–20% of the BC multiple-choice section.

Only in Part B, as on the exam. Questions 1–18 are Part A, with no calculator; questions 19–20 are Part B, where the exam allows a graphing calculator (on the digital exam, the Desmos calculator built into Bluebook is available there). Both Part B questions need one: how many terms an alternating series such as the sum of (−1)ⁿ⁺¹ln(n + 1)/n² needs for an error below 0.0025, and a Lagrange error bound from a third derivative such as ln(x² + 2). Most Unit 10 questions on the exam are in the no-calculator section, as on this sheet. From May 2027 the BC exam's multiple-choice section is 29 questions without a calculator and 13 with one.

We tagged 760 official multiple-choice questions from 17 College Board BC exams (1969–2018) and the BC free-response questions from 1998 to 2026, sorted the Unit 10 questions into 19 kinds, and weighted each kind by how often and how recently the BC exam asks it. Every kind the exam's multiple choice actually uses gets at least one question, and the most-tested get more (3 on radius and interval of convergence). Left out: nth term test.

The progress check is College Board's own end-of-unit quiz in AP Classroom, assigned by your teacher. Its questions are not public, and we do not have them: Sigma Prep is not affiliated with College Board. This worksheet is exam-style practice on the same unit: 20 original multiple-choice questions, weighted by how often the official BC exams ask each kind of question, with a no-calculator Part A and a calculator Part B. Time yourself, check the answer key, then redo the kinds you missed. For the free-response part, use the Unit 10 FRQ set, which has a scoring guide.

No. Every question here is original, written by Sigma Prep in the style of the exam. We studied which kinds of questions the official exams ask and how often; no official question is copied or reworded. Each answer was checked by an independent computer-algebra check before the sheet was published.

Yes. It is shown with the sheet, and the PDF prints it on its own last page. There is also a PDF without the key to hand out. Worked solutions are not included.

AP is a registered trademark of the College Board, which was not involved in making this worksheet and does not endorse it. All questions are original to Sigma Prep. Frozen 2026-11-10.