Σ
SigmaPrep
AP Physics 1 worksheetsBlog
← All articles
AP Physics 1AP Exams

AP Physics 1 Unit 2 Review: The Most-Tested Forces and Dynamics Questions

Σ
Sigma Prep
Physics and Math Instructor · 10+ Years Experience
November 2026·11 min read
Key takeaways
  • Unit weight: the biggest unit in the multiple choice: 30 of the 117 official questions (25.6%), about 8 of the 42.
  • Top types: the friction lab (2.4% of the exam, free response only), how the gravitational force scales, and free-body diagrams (1.6% each).
  • Practice: reading the forces from a picture. Half of the 30 official Unit 2 questions are read from a diagram and only 4 have a number for an answer, while classrooms spend a third of their practice on the unit.

Forces is the biggest unit in the AP Physics 1 multiple choice, and classrooms practice it even more than the exam asks it. College Board’s Course and Exam Description (the CED) gives Unit 2, Force and Translational Dynamics, 18–23% of the multiple choice. Of the 117 distinct official multiple choice questions still in the course, 30 are Unit 2 (25.6%), more than any other unit. On the 42-question section that starts in May 2027, that is about 8 questions. In the classroom material we tagged, though, Unit 2 is 33.1% of all practice questions: a third of the practice on a unit worth about a fifth of the multiple choice.

The exam asks for reasoning about forces, usually from a picture. Half of the 30 official Unit 2 questions (15) are read from a diagram, and only 4 have a number as the answer. On the free response, Unit 2 was 80 of 317 in-scope points (25.2%) on the 2015–2024 exams. On the redesigned exams (2025 and 2026) and the 2024 sample it was 14 of 120 points (11.7%), and all 10 of its points on the 2025 and 2026 exams came from one 2026 lab question: measuring a coefficient of friction.

The 10 must-know Unit 2 question types

Ranked by their share of the whole exam. The ten add up to about 13.5% of the exam, out of 20.0% for all of Unit 2.

1. Lab: measure a coefficient of friction (free response)

Design the measurement, choose what to graph so it is a straight line, and get the coefficient from the slope.

Topic 2.72.4% of the exam5th-largest type in the courseno MC version12 FRQ parts, 19 points (2017, 2026)
Try it
You pull a block across a board at constant speed with a force sensor, adding mass to the block between runs, and plot the sensor reading FFF against the normal force FNF_NFN​. The points lie on a line through the origin with slope 0.35. What is the coefficient of kinetic friction, and why must the speed be constant?
Solution

μk=0.35\mu_k = 0.35μk​=0.35, the slope, since F=μkFNF = \mu_kF_NF=μk​FN​. At constant speed the net force is zero, so the pull equals the friction force.

Common mistake
Graphing the force against the mass instead. That slope is μkg≈3.4\mu_kg \approx 3.4μk​g≈3.4 N/kg, not the coefficient. The other is pulling while the block speeds up, which makes the sensor read more than the friction.

2. Universal gravitation: how the force scales

What happens to the gravitational force when a mass or the distance between centers changes.

Topic 2.61.6% of the exam2 official MC5 FRQ parts (one 2022 question)
Exam-style questionMultiple choice
Two small lead spheres sit on a laboratory bench. When their centers are a distance rr apart, the gravitational force between them has magnitude F0F0​. Then one sphere is replaced by a sphere of half its mass, and the distance between the centers is doubled. What is the magnitude of the gravitational force between them now?
  1. 2F02F0​
  2. F088F0​​
  3. F044F0​​
  4. F022F0​​
Solution

(B) F088F0​​. By Newton's law of gravitation, F=Gm1m2r2F=r2Gm1​m2​​: the force is proportional to each mass and inversely proportional to the square of the distance between the centers. Halving one sphere's mass multiplies the force by 1221​, and doubling the distance multiplies it by (12)2=14(21​)2=41​, so the force is multiplied by 12⋅14=1821​⋅41​=81​.

Common mistakes
(C) Leaving the distance factor unsquared: 12⋅12=1421​⋅21​=41​; doubling the distance divides the force by 4, not 2. (A) Multiplying by the square of the distance factor instead of dividing: 12(2)2=221​(2)2=2; the force falls as 1r2r21​. (D) Ignoring the change in distance: halving the mass alone gives F022F0​​, and doubling the distance divides the force by 4 more.

3. Choose or draw the free-body diagram

Which forces act on the object, in which directions, and with which relative lengths.

Topic 2.21.6% of the exam2 official MC (2015 practice exam)main task of FRQ parts in 5 years
Exam-style questionMultiple choice
A brick slides down a rough plank at constant speed. The plank makes an angle θ=30∘θ=30∘ with the horizontal and rises to the left, as shown. Which of the following free-body diagrams best represents the forces exerted on the brick? In the diagrams, FNFN​ is the normal force exerted by the plank, FfFf​ is the frictional force exerted by the plank, and FgFg​ is the gravitational force exerted by Earth.
θ
  1. FNFfFg
  2. FNFg
  3. FNFfFg
  4. FfFg
Solution

(A) FgFg​ straight down, FNFN​ perpendicular to the plank, and FfFf​ up the plank. The velocity is constant, so the forces balance. Friction opposes the sliding; the normal force is the plank's push on the brick; gravity acts toward the center of Earth.

Common mistakes
(D) Leaving out the normal force: the plank pushes on the sliding brick, perpendicular to its surface. (B) Leaving out friction: the plank is rough and the brick slides, so friction acts up the plank. (C) Drawing the gravitational force perpendicular to the plank: it points straight down, toward the center of Earth.

4. Pulley systems (Atwood and modified Atwood)

Acceleration and tension for masses joined by a string over a pulley, often in symbols.

Topic 2.51.4% of the examno official MC as its main type6 FRQ parts (2015 and 2019)
Exam-style questionMultiple choice
As shown, a block of mass m1m1​ rests on a level, frictionless tabletop, joined by a light string over a light, frictionless pulley to a block of mass m2m2​ that hangs over the edge. The blocks are released from rest. What is the magnitude of the acceleration of the blocks?
m1m2
  1. (m2−m1)gm1+m2m1​+m2​(m2​−m1​)g​
  2. gg
  3. m2gm1m1​m2​g​
  4. m2gm1+m2m1​+m2​m2​g​
Solution

(D) m2gm1+m2m1​+m2​m2​g​. Treat both blocks and the string as one system. Along the string, only the hanging block's weight m2gm2​g drives the motion (the table block's weight is balanced by the normal force); the system's mass is m1+m2m1​+m2​. So a=Fnetmsys=m2gm1+m2a=msys​Fnet​​=m1​+m2​m2​g​.

Common mistakes
(C) Dividing by the table block's mass alone: the net force accelerates both blocks, so divide by m1+m2m1​+m2​. (A) Treating the table block as a second hanging block: its weight is balanced by the normal force and does not oppose the motion. (B) Taking the free-fall acceleration: the string connects the blocks, so the hanging block does not fall freely.

5. Circular orbits: speed, period and radius

How a satellite’s speed and period depend on the radius of its orbit and the mass it orbits.

Topic 2.91.3% of the exam3 official MCFRQ parts (2018)
Try it
Satellite B orbits Earth at 4 times the orbital radius of satellite A. Compare their speeds and periods.
Solution

v=GM/rv = \sqrt{GM/r}v=GM/r​, so B moves at half A’s speed; it goes 4 times as far around at half the speed, so its period is 8 times as long.

Common mistake
Using v=ωrv = \omega rv=ωr as if the satellites turned together, and saying B is faster. Orbits farther out are slower.

6. Object on an incline

Acceleration and the forces on an object on a ramp, with or without friction.

Topic 2.51.2% of the examno official MC as its main typeFRQ parts (2016, 2023, 2024 sample)
Try it
A block slides down a frictionless ramp tilted 25° above the horizontal. What is its acceleration?
Solution

ggg sin 25° ≈ 4.1 m/s², down the ramp. The mass does not matter.

Common mistake
Using cos instead of sin (9.8 cos 25° ≈ 8.9 m/s²). A check: at 0° the acceleration has to be zero, and sin 0° = 0.

7. Newton’s third law pairs

Which force pairs with which, and what equal forces mean for unequal masses.

Topic 2.31.1% of the exam4 official MC (tied most in Unit 2)no FRQ part as its main task
Try it
A 2000 kg truck and a 1000 kg car collide, and the truck exerts a 30,000 N force on the car. What force does the car exert on the truck, and what are their accelerations?
Solution

30,000 N, opposite in direction. The truck accelerates at 15 m/s² and the car at 30 m/s².

Common mistake
Saying the heavier or faster vehicle exerts the bigger force. The forces are always equal; the accelerations are not.

8. Equilibrium with angled forces

Balance the components of forces at angles: tensions in cables, a hanging sign, a box pulled at an angle.

Topic 2.41.0% of the exam4 official MC (tied most in Unit 2)no FRQ part as its main task
Try it
A 5.0 kg sign hangs at rest from two cables, each at 30° above the horizontal on either side. Find the tension in each cable.
Solution

The vertical components hold the weight: 2T2T2T sin 30° = 49 N, so T=49T = 49T=49 N, as large as the whole weight.

Common mistake
Splitting the weight between the cables (about 25 N each) and forgetting that only the vertical part of each tension holds the sign up.

9. Horizontal circle: which force provides the centripetal acceleration

Name the real force that points to the center (friction, tension, a normal force) and use it.

Topic 2.91.0% of the examno official MC as its main type4 FRQ parts (2023)
Try it
A car rounds a flat curve of radius 50 m. The coefficient of static friction between the tires and the road is 0.80. Which force keeps the car on the curve, and what is the fastest it can go?
Solution

Static friction from the road, toward the center. μsmg=mv2/r\mu_smg = mv^2/rμs​mg=mv2/r gives v=0.80×9.8×50≈20v = \sqrt{0.80 \times 9.8 \times 50} \approx 20v=0.80×9.8×50​≈20 m/s.

Common mistake
Drawing an outward “centrifugal” force, or using kinetic friction. The tires are not sliding sideways.

10. Vertical circle: normal force or tension at the top and bottom

Compare the normal force or tension with the weight at the top of a hill, the bottom of a dip, or a loop.

Topic 2.91.0% of the exam3 official MC1 FRQ part (2024)
Try it
A 0.50 kg ball on a 0.80 m string swings in a vertical circle and moves at 4.0 m/s at the bottom. What is the tension there?
Solution

The net force points up, toward the center: T−mg=mv2/rT - mg = mv^2/rT−mg=mv2/r, so T=4.9T = 4.9T=4.9 N + 10 N ≈ 15 N.

Common mistake
Subtracting the weight (10 − 4.9 = 5.1 N) or leaving it out (10 N). At the bottom the string must hold the ball up and also pull it toward the center.

What’s rising and fading in Unit 2

We compare each type’s share of the exams from 2022 on (the 2022 practice exam, the 2024 samples and the 2022–2026 free response) with its share of the 2014–2021 exams: Rising is at least double, Fading under half. An appearance is a multiple choice question or a free-response part with the type as its main or secondary task. With so few recent sources, read these as directions.

  • Rising: gravitational force scaling. 1 official appearance in 2014–2021, 7 from 2022 on; its share went from 0.6% to 2.8%. All 7 come from 2022: six parts of one free-response question and one practice-exam question, so it rests on one year’s exams.
  • Rising: Hooke’s law and the vertical circle. Hooke’s law went from 0 appearances to 8, including the 2024 sample; the vertical circle from 1 to 4, including one of the three Unit 2 multiple choice samples in the 2024 CED.
  • Fading: pulley systems. 8 appearances in 2014–2021 and 1 since (a secondary step in a 2022 question); share 3.3% to 0%. Atwood machines are still the fourth-largest Unit 2 type, because their free-response points (2015 and 2019) keep them there.
  • Fading: circular orbits. 7 appearances to 1; share 3.1% to 0.8%.
  • Fading, with a caveat: free-body diagrams. 7 appearances before 2022 and 5 since, including both 2024 free-response samples, but 3 of those 5 are a step inside a larger question rather than its main task, so its share fell from 3.4% to 0.8%. You will still draw free-body diagrams; they are just less often the whole question.

In the CED, rarely or never tested

Still testable, so don’t skip them, but lower priority than the ten above.

  • Eight Unit 2 types have no official multiple choice question and no free-response part as their main or secondary type: uniform circular motion calculations (centripetal acceleration, period and speed), kinetic friction on a sliding object, drag and terminal velocity, the first law (constant velocity means zero net force), locating a center of mass, choosing a system, identifying the forces and what exerts them, and weight as mgmgmg. Several are skills every other question uses.
  • Newton’s second law for a single object has no official multiple choice question as its main type and only a secondary role in free response, yet it is the most-practiced Unit 2 type in classrooms (72 questions in 25 files we tagged).

What students over- and under-practice in Unit 2

We tagged 2,278 in-scope multiple choice questions from teacher worksheets, review packets and prep books (reposted official questions removed). Unit 2 is 33.1% of them, against 25.6% of the 117 official questions and a CED range of 18–23%. Unlike kinematics, the gap does not close in newer material: Unit 2 is still 32.1% of the practice questions dated 2019 or later. Per type:

Question typePractice vs official shareRatio
Newton’s second law, one object3.16% vs 0%never asked
Uniform circular motion calculations2.77% vs 0%never asked
First law: constant velocity2.19% vs 0%never asked
Newton’s third law pairs2.81% vs 3.42%0.8× under
Circular orbits1.84% vs 2.56%0.7× under
Vertical circle1.27% vs 2.56%0.5× under
Equilibrium with angled forces1.45% vs 3.42%0.4× under
Apparent weight when accelerating0.70% vs 1.71%0.4× under
Choose the free-body diagram0.40% vs 1.71%0.2× under
Center of mass unchanged by internal forces0.26% vs 1.71%0.15× under

Official counts per type are small (2 to 4 questions), so read the ratios as directions.

  • Classrooms drill calculation; the exam asks for reasoning from a picture. 192 of the 753 Unit 2 practice questions (25.5%) have a number as the answer, against 4 of the 30 official ones (13.3%). Half of the official questions (15 of 30) are read from a diagram, against 225 of 753 practice questions (29.9%).
  • Free-body diagrams are under-practiced: 9 multiple choice practice questions in 7 files we tagged, against 2 official multiple choice questions and free-response parts in 10 official questions.
  • The friction lab has no practice at all: none of the 2,278 questions we tagged, against 19 free-response points in 2017 and 2026. Across the course, the seven lab types are 8.8% of the exam.

Calculator and equation sheet note

A calculator is allowed on the whole AP Physics 1 exam, multiple choice and free response, and so is the equation sheet, which lists Newton’s second law, the friction and spring-force equations, universal gravitation, centripetal acceleration and g=9.8g = 9.8g=9.8 m/s². The CED says g≈10g \approx 10g≈10 m/s² may be used and that 9.8 is not penalized; the 2025 and 2026 scoring guidelines use 9.8. Most Unit 2 questions, though, are decided by the free-body diagram before any arithmetic: which forces act, and which way the net force points.

How we counted

  • Official multiple choice. 177 questions from the 2015, 2017 and 2022 practice exams and College Board’s 2014, 2020 and 2024 sample questions: 117 once copies and questions on topics no longer in the course, such as circuits and waves, are taken out.
  • Official free response. 205 in-scope free-response parts, worth 437 points, from the 2015–2019 and 2021–2026 exams and the course description’s 2024 sample.
  • Matching. Each question is tagged to a topic of College Board’s Course and Exam Description (the CED) and to one of 137 question types inside the topics.
  • Classroom practice. 2,278 in-scope multiple choice questions from teacher worksheets, review packets and prep books, with reposted official questions removed.

Physics 1 has few official questions written for the current course, and only two exams in the new format, so treat small counts as directions, not certainties. Every example on this page is our own; the ranking for the whole course is in the must-know AP Physics 1 question types.

Practice Unit 2

Our free AP Physics 1 Unit 2 worksheet has 30 original multiple choice questions, with free-body diagram and figure choices like the exam’s. Unit 2 has 31 multiple choice types, so the sheet has one question on each of 30 of them. It has an answer key and a PDF.

Good practice before the Unit 2 Progress Check in AP Classroom. For the free response, the Unit 2 FRQ practice set has four questions, one of each kind on the exam, with a scoring guide.

More review: Unit 1 review · Unit 3 review · all units · all AP Physics 1 practice tests.

← Previous unitUnit 1: KinematicsNext unit →Unit 3: Work, Energy, and Power

Common Questions

The CED gives Unit 2 18–23% of the multiple choice, as much as any unit. Of the 117 distinct official multiple choice questions still in the course, 30 are Unit 2 (25.6%), the most of any unit, about 8 questions on the 42-question section that starts in May 2027. On the free response it was 80 of 317 in-scope points on the 2015–2024 exams and 14 of 120 points on the 2025 and 2026 exams and the 2024 sample.

Yes. They appear in 5 official free-response questions from 2022 on, including both 2024 samples, though in 3 of those they are a step inside a larger question rather than the main task. On the multiple choice, 2 official questions ask you to choose the diagram. Classroom material practices them little: 9 multiple choice questions in the 2,278 we tagged.

Less than it was. Pulley systems appeared 8 times on the official exams from 2014 to 2021 and once since (a step in a 2022 free-response question). They were the main task of free-response parts in 2015 and 2019, which still makes them the fourth-largest Unit 2 type.

Measuring a coefficient of friction. It was a 9-point free-response question in 2017 and a 10-point one in 2026, where it was all of Unit 2’s free-response points: plan the measurement, choose a graph that gives a straight line, and get the coefficient from the slope. None of the classroom questions we tagged practice it.

Use 9.8 m/s², the value on the equation sheet and in the 2025 and 2026 scoring guidelines. The CED also allows g ≈ 10 m/s² and says 9.8 is not penalized, so either is accepted.

Practice this unit: free AP Physics 1 Unit 2 worksheet

Exam-style multiple choice with an answer key and a printable PDF, and a free-response set with a scoring guide. No sign-up needed.

Get the Unit 2 worksheet →

Keep reading

AP Physics 1

AP Physics 1 Review: The Most-Tested Questions, Unit by Unit

AP Physics 1 review: the exam format, what each unit is worth and the 10 question types that matter most, ranked from the official exams, with examples.

AP Physics 1

AP Physics 1 Unit 8 Review: The Most-Tested Fluids Questions

AP Physics 1 Unit 8 review: the 6 fluids question types that matter most, each with an example and the common mistake, and what the 2025–26 FRQs asked.

AP Physics 1

AP Physics 1 Unit 7 Review: The Most-Tested Oscillations Questions

AP Physics 1 Unit 7 review: the 6 oscillation question types that matter most, each with an example and the common mistake, including the dropped 2π.

Σ
SigmaPrep

Sigma Prep (sigmaprep.io) makes free AP Physics 1 practice: exam-style multiple choice and free response for all eight units, with answer keys and scoring guides, plus a formula sheet.

AP Physics 1

Practice tests by unitFree-response practiceFormula sheetUnit reviews

Sigma Prep

Math worksheetsAboutContact

Legal

TermsPrivacy
© 2026 Sigma Prep. All rights reserved.AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this site.