Σ
SigmaPrep
AP Physics 1 worksheetsBlog
← All articles
AP Physics 1AP Exams

AP Physics 1 Unit 3 Review: The Most-Tested Work, Energy and Power Questions

Σ
Sigma Prep
Physics and Math Instructor · 10+ Years Experience
November 2026·11 min read
Key takeaways
  • Unit weight: 26 of the 117 official multiple choice questions (22.2%), about 8 of the 42, but only 8.9% of classroom practice.
  • Top types: conservation of mechanical energy, the largest type in the whole course (4.1% of the exam), the energy lab (2.4%) and energy with friction (2.3%).
  • Practice: the free response. The energy lab (26 points) and conservation of mechanical energy (20 points) are the two free-response types worth the most points across every exam.

Energy is the second-biggest unit in the AP Physics 1 multiple choice and the most under-practiced unit for its size. College Board’s Course and Exam Description (the CED) gives Unit 3, Work, Energy, and Power, 18–23% of the multiple choice, as much as any unit. Of the 117 distinct official multiple choice questions still in the course, 26 are Unit 3 (22.2%), second only to Unit 2’s 30. On the 42-question section that starts in May 2027, that is about 8 questions. In the classroom material we tagged, though, Unit 3 is only 8.9% of the practice questions: about 0.4 times its share of the exam.

The free response leans on energy too. The two free-response question types worth the most points across every exam we have are both Unit 3: the energy lab (26 points) and conservation of mechanical energy (20 points). Unit 3 was 66 of 317 in-scope points (20.8%) on the 2015–2024 exams, and it had more free-response points than any other unit on the 2015, 2016, 2019 and 2025 exams. On the redesigned exams (2025 and 2026) and the 2024 sample it was 15 of 120 points (12.5%).

The 10 must-know Unit 3 question types

Ranked by their share of the whole exam. The ten add up to about 16.2% of the exam, out of 18.2% for all of Unit 3.

1. Conservation of mechanical energy

Trade kinetic for potential energy (and back) when no friction or other dissipation acts: speeds at different heights, how high something goes, how far a spring launches it.

Topic 3.44.1% of the examthe largest type in the whole course5 official MC (tied most in Unit 3)8 FRQ parts, 20 points
Exam-style questionMultiple choice
A parcel of mass MM is released from rest on a frictionless chute that makes an angle θθ with the horizontal. It slides down the chute into a light spring parallel to the chute and comes momentarily to rest after traveling a total distance LL along the chute, by which point the spring is compressed by xx. Which expression gives the spring constant?
  1. 2MgLcos⁡θx2x22MgLcosθ​
  2. MgLsin⁡θx2x2MgLsinθ​
  3. 2MgLsin⁡θx2x22MgLsinθ​
  4. 2MgLx2x22MgL​
Solution

(C) 2MgLsin⁡θx2x22MgLsinθ​. The parcel starts and ends at rest, so all the gravitational energy it loses becomes spring energy. Its drop in height is Lsin⁡θLsinθ, not LL: MgLsin⁡θ=12kx2MgLsinθ=21​kx2.

Common mistakes
(B) Leaving out the 1221​ in the spring energy, MgLsin⁡θ=kx2MgLsinθ=kx2: the spring stores 12kx221​kx2. (A) Using cos⁡θcosθ for the drop in height, MgLcos⁡θ=12kx2MgLcosθ=21​kx2: the parcel drops Lsin⁡θLsinθ, the side of the triangle opposite the angle. (D) Taking the distance along the chute, LL, as the drop in height, MgL=12kx2MgL=21​kx2: the parcel drops only Lsin⁡θLsinθ.

2. Lab: measure energies before and after a process (free response)

Plan the measurements, choose a graph that gives a straight line, and decide from its slope whether mechanical energy was conserved or how much was lost.

Topic 3.42.4% of the exam4th-largest type in the courseno MC version8 FRQ parts, 26 points (most of any)
Try it
Students release a cart from several heights hhh on a ramp and measure its speed vvv at the bottom with a photogate. What should they graph to test whether mechanical energy is conserved, and what do they conclude if the best-fit slope is 17.6 m²/s²?
Solution

Graph v2v^2v2 against hhh. With no losses v2=2ghv^2 = 2ghv2=2gh, a line through the origin with slope 2g=19.62g = 19.62g=19.6 m²/s². A slope of 17.6 means the cart keeps about 90% of the energy (17.6 ÷ 19.6); about 10% is dissipated.

Common mistake
Graphing vvv against hhh. That is a curve, and its slope means nothing simple; squaring the speed is what makes the line.

3. Energy with friction or other dissipation

How much mechanical energy friction or air resistance turns into thermal energy, and what is left.

Topic 3.42.3% of the exam5 official MC (tied most in Unit 3)2 FRQ parts (2015)
Exam-style questionMultiple choice
The table gives the height and speed of a rubber mat of mass 2.8 kg2.8kg at two points of its trip down a rough playground slide. How much energy is dissipated by friction between points P and Q? Use g=9.8 m/s2g=9.8m/s2.
Pointh (m)h (m)v (m/s)v (m/s)
P1.801.802.02.0
Q0.720.723.03.0
  1. 23 J23J
  2. 28 J28J
  3. 29.6 J29.6J
  4. 37 J37J
Solution

(A) 23 J23J. The energy dissipated is the decrease in mechanical energy between the two points. ΔEth=mg(hP−hQ)+12m(vP2−vQ2)ΔEth​=mg(hP​−hQ​)+21​m(vP2​−vQ2​)=(2.8 kg)(9.8 m/s2)(1.08 m)+12(2.8 kg)[(2.0 m/s)2−(3.0 m/s)2]=(2.8kg)(9.8m/s2)(1.08m)+21​(2.8kg)[(2.0m/s)2−(3.0m/s)2]=23 J=23J.

Common mistakes
(D) Adding the kinetic energy gained to the potential energy lost, 29.6 J+7.0 J=36.6 J≈37 J29.6J+7.0J=36.6J≈37J: the mat speeds up, so less energy is dissipated than the potential energy lost. (B) Squaring the change in speed: 12m(vQ−vP)2=1.4 J21​m(vQ​−vP​)2=1.4J in place of 12m(vQ2−vP2)=7.0 J21​m(vQ2​−vP2​)=7.0J, so 29.6 J−1.4 J=28 J29.6J−1.4J=28J. (C) Taking the gravitational potential energy lost, (2.8 kg)(9.8 m/s2)(1.08 m)=29.6 J(2.8kg)(9.8m/s2)(1.08m)=29.6J, as the energy dissipated: 7.0 J7.0J of it became the mat's extra kinetic energy.

4. Work as the area under a force-position graph

Read the work done by a changing force from the area under its graph, then the change in kinetic energy.

Topic 3.21.5% of the exam4 official MCno FRQ part as its main task
Exam-style questionMultiple choice
A camera dolly with 12 J12J of kinetic energy rolls in the +x+x-direction onto a stretch of level rail where a magnetic brake pushes on it opposite its motion, starting at x=0x=0. In four trials the brake is set differently; each graph shows the brake's force on the dolly as a function of position until the force is switched off. In which trial does the dolly come to rest exactly where the force is switched off?
  1. 0.51.01.52.0−9−8−7−6−5−4−3−2−10x (m)F (N)
  2. 0.51.01.52.0−9−8−7−6−5−4−3−2−10x (m)F (N)
  3. 0.51.01.52.0−9−8−7−6−5−4−3−2−10x (m)F (N)
  4. 0.51.01.52.0−9−8−7−6−5−4−3−2−10x (m)F (N)
Solution

(D) the graph whose area is the kinetic energy. The dolly stops where the braking force has done negative work equal to its kinetic energy, 12 J12J: the area between the force graph and the xx-axis must be 12 J12J by the end of the graph. The areas are 12 J12J for the constant force, and 6 J6J for each of the other three graphs (two triangles, and a graph that rises to 0 at x=0.75 mx=0.75m and falls back), so with those forces the dolly is still moving when the force ends.

Common mistakes
(A) Multiplying the force at the end, −6 N−6N, by the distance: this line falls from 0 to −6 N−6N, so the area between it and the xx-axis is half of that, 6 J6J. (B) Multiplying the starting force, −8 N−8N, by the distance: this line rises from −8 N−8N to 0, so the area is half of that, 6 J6J. (C) Averaging the forces at the two ends, −8 N−8N, as for a straight line: this graph rises from −8 N−8N to 0 at x=0.75 mx=0.75m and falls back to −8 N−8N, so its area is only 6 J6J.

5. Energy bar charts

Draw or choose the bars for kinetic, potential and thermal energy, and any work done from outside the system, before and after a process.

Topic 3.41.3% of the examno official MC4 FRQ parts, 10 points
Try it
A ball is thrown straight up from the ground with 6 units of kinetic energy. The system is the ball and Earth (gravitational potential energy zero at the ground), and air resistance is negligible. What are the bars halfway up, and at the top?
Solution

Halfway up, 3 units of kinetic and 3 of gravitational potential energy; at the top, 0 kinetic and 6 potential. The total stays 6 units, because nothing outside the system does work on it.

Common mistake
Mixing up the system. If the ball alone is the system, there is no potential energy bar: gravity is an outside force, and its work (−6 units on the way up) is what takes the kinetic energy away.

6. Work by a constant force

The work a single force does: Fdcos⁡θFd \cos \thetaFdcosθ, its sign, and which forces do no work at all.

Topic 3.21.2% of the exam3 official MCno FRQ part as its main task
Try it
A student pulls a sled 20 m across level snow at constant speed with a rope at 30° above the horizontal and a tension of 50 N. How much work does the rope do, and how much does friction do?
Solution

The rope does (50)(20) cos 30° ≈ 870 J. The speed is constant, so the net work is zero and friction does about −870 J. The normal force and gravity do no work, since they are perpendicular to the motion.

Common mistake
Using sin instead of cos (500 J) or leaving out the angle (1000 J). Only the part of the force along the motion does work.

7. Choice of system: does its energy change?

Decide whether a system’s energy changes, and which energies it can have, once you choose what is inside it.

Topic 3.41.1% of the exam3 official MC2 FRQ parts (2022 and 2023)
Try it
A hand lifts a 2.0 kg book 1.5 m at constant speed. Describe the energy of the book alone, and of the book and Earth together.
Solution

For the book alone, the hand does about +29 J of work and gravity, now an outside force, does about −29 J; the kinetic energy does not change, and a single object has no potential energy. For the book-Earth system, the hand is the only outside force: its +29 J goes into gravitational potential energy.

Common mistake
Counting gravity twice: subtracting gravity’s work and adding the gain in potential energy for the same system. Use one or the other, depending on whether Earth is inside the system.

8. Sketch energy against position (free response)

Sketch kinetic, potential and total mechanical energy as an object moves, including where friction acts.

Topic 3.41.0% of the examno MC version4 FRQ parts, 9 points
Try it
A 0.50 kg block slides from rest down a frictionless straight ramp 0.80 m high and 1.0 m long horizontally, then across a rough level floor, where it stops after 2.0 m. Describe the graphs of its energies against horizontal position.
Solution

On the ramp, the gravitational potential energy falls in a straight line from 3.9 J to 0 while the kinetic energy rises from 0 to 3.9 J, and their total stays 3.9 J. On the floor, the potential energy stays 0 and the kinetic energy falls in a straight line to 0 at 2.0 m. That slope, 3.9 J over 2.0 m, is the friction force, about 2.0 N, so μk=0.40\mu_k = 0.40μk​=0.40.

00.51.01.52.02.53.0012345x (m)Energy (J)UgK
Common mistake
Drawing the kinetic energy on the rough floor as a curve, or keeping the total flat there. A constant friction force takes energy away at a constant rate per meter.

9. Work-energy theorem

The net work done on an object equals its change in kinetic energy: find a force, a distance or a speed.

Topic 3.20.8% of the exam2 official MCno FRQ part as its main task
Try it
A 1200 kg car brakes from 20 m/s to 10 m/s over 50 m. What is the net work on it, and the average braking force?
Solution

ΔK=12(1200)(102−202)=−180\Delta K = \tfrac{1}{2}(1200)(10^2 - 20^2) = -180ΔK=21​(1200)(102−202)=−180,000 J, so the average force is 180,000 J ÷ 50 m = 3600 N, against the motion.

Common mistake
Squaring the change in speed instead of taking the change in the squares: ½(1200)(10)² = 60,000 J gives 1200 N, a third of the real force.

10. Combined spring and gravitational potential energy

Track the spring and gravitational potential energy together when a mass hangs on, or drops onto, a vertical spring.

Topic 3.30.6% of the exam2 official MCno FRQ part as its main task
Try it
A 2.0 kg block is attached to a relaxed vertical spring (k=196k = 196k=196 N/m) and lowered slowly by hand until it hangs at rest. How far does the spring stretch, and how does the potential energy of the block-spring-Earth system change?
Solution

At rest kx=mgkx = mgkx=mg, so x=19.6÷196=0.10x = 19.6 \div 196 = 0.10x=19.6÷196=0.10 m. The gravitational potential energy changes by −(2.0)(9.8)(0.10) = −1.96 J and the spring’s by +½(196)(0.10)² = +0.98 J, so the system loses 0.98 J: the hand, holding back on the way down, took it.

Common mistake
Setting mgx=12kx2mgx = \tfrac{1}{2}kx^2mgx=21​kx2, which gives 0.20 m. That is how far the block falls if it is let go from the relaxed spring (the lowest point of its bounce), not where it hangs at rest.

What’s rising and fading in Unit 3

We compare each type’s share of the exams from 2022 on (the 2022 practice exam, the 2024 samples and the 2022–2026 free response) with its share of the 2014–2021 exams: Rising is at least double, Fading under half. An appearance is a multiple choice question or a free-response part with the type as its main or secondary task. With so few recent sources, read these as directions.

  • Rising: energy bar charts. No official appearance in 2014–2021, 4 from 2022 on (free-response parts in 2022, 2024 and 2025 and a 2024 sample); share 0% to 2.0%.
  • Rising: the work-energy theorem and kinetic energy calculations. Each went from 0 appearances to 4. The work-energy theorem is in the 2022 practice exam, the 2024 samples and a step of a 2023 free-response question; kinetic energy calculations are free-response parts in 2022, 2024 and 2026.
  • Fading: the energy lab. 7 appearances in 2014–2021 and 2 since, both in one 2022 question; share 5.2% to 1.4%. Its 26 points still make it the fourth-largest type in the course, and the redesigned exams still have a lab question every year (on torque in 2025, on friction in 2026).
  • Still the biggest: conservation of mechanical energy. 11 appearances before 2022 and 7 since; its share fell from 5.1% to 2.8%, not enough to count as fading, and it is the main task of free-response parts in 2022, 2024 and 2025.
  • Dormant: elastic potential energy on its own. 6 appearances before 2022, none since. Springs now come inside bigger energy questions.

In the CED, rarely or never tested

Still testable, so don’t skip them, but lower priority than the ten above.

  • Instantaneous power (P=Fv)(P = Fv)(P=Fv) has no official multiple choice question and no free-response part, though it is on the equation sheet and in 12 classroom questions we tagged.
  • Average power has no official multiple choice question and one free-response part, in 2019. Gravitational potential energy near Earth (mgΔy)(mg\Delta y)(mgΔy) has no official multiple choice question and has appeared once, as a step in a 2023 free-response question. Both are skills the bigger questions use.

What students over- and under-practice in Unit 3

We tagged 2,278 in-scope multiple choice questions from teacher worksheets, review packets and prep books (reposted official questions removed). Unit 3 is 8.9% of them, against 22.2% of the 117 official questions and a CED range of 18–23%. Newer material does a little better, 11.9% of the practice questions dated 2019 or later, but still well short. Per type:

Question typePractice vs official shareRatio
Instantaneous power (P=Fv)(P = Fv)(P=Fv)0.53% vs 0%never asked
Average power0.66% vs 0%no multiple choice
Work by a constant force1.76% vs 2.56%0.7× under
Work-energy theorem1.10% vs 1.71%0.6× under
Conservation of mechanical energy2.11% vs 4.27%0.5× under
Energy with friction or dissipation0.75% vs 4.27%0.2× under
Work as area under a force-position graph0.53% vs 3.42%0.15× under
Choice of system0.26% vs 2.56%0.1× under
Combined spring and gravitational PE0% vs 1.71%no practice

Official counts per type are small (2 to 5 questions), so read the ratios as directions.

  • Classrooms drill calculation; the exam asks you to picture the situation. 85 of the 203 Unit 3 practice questions (41.9%) have a number as the answer, against 8 of the 26 official ones (30.8%). 16 of the 26 official questions (61.5%) are read from a diagram, against 51 of 203 practice questions (25.1%).
  • The free-response-only energy tasks have no practice at all: none of the 2,278 questions we tagged is an energy lab, an energy bar chart or an energy-position sketch, against 45 free-response points between them. Across the course, the seven lab types are 8.8% of the exam.

Calculator and equation sheet note

A calculator is allowed on the whole AP Physics 1 exam, multiple choice and free response, and so is the equation sheet, which lists K=12mv2K = \tfrac{1}{2}mv^2K=21​mv2, W=Fdcos⁡θW = Fd \cos \thetaW=Fdcosθ, ΔK=ΣW\Delta K = \Sigma WΔK=ΣW, Us=12k(Δx)2U_s = \tfrac{1}{2}k(\Delta x)^2Us​=21​k(Δx)2, UG=−Gm1m2/rU_G = -Gm_1m_2/rUG​=−Gm1​m2​/r, ΔUg=mgΔy\Delta U_g = mg\Delta yΔUg​=mgΔy, the two power equations and g=9.8g = 9.8g=9.8 m/s². The formulas are given; what the exam tests is choosing the system and keeping track of where the energy goes.

How we counted

  • Official multiple choice. 177 questions from the 2015, 2017 and 2022 practice exams and College Board’s 2014, 2020 and 2024 sample questions: 117 once copies and questions on topics no longer in the course, such as circuits and waves, are taken out.
  • Official free response. 205 in-scope free-response parts, worth 437 points, from the 2015–2019 and 2021–2026 exams and the course description’s 2024 sample.
  • Matching. Each question is tagged to a topic of College Board’s Course and Exam Description (the CED) and to one of 137 question types inside the topics.
  • Classroom practice. 2,278 in-scope multiple choice questions from teacher worksheets, review packets and prep books, with reposted official questions removed.

Physics 1 has few official questions written for the current course, and only two exams in the new format, so treat small counts as directions, not certainties. Every example on this page is our own; the ranking for the whole course is in the must-know AP Physics 1 question types.

Practice Unit 3

Our free AP Physics 1 Unit 3 worksheet has 20 original multiple choice questions, with energy bar chart and graph choices like the exam’s. Every Unit 3 multiple choice type is on it, and conservation of mechanical energy, the biggest type on the exam, gets five questions. It has an answer key and a PDF.

Good practice before the Unit 3 Progress Check in AP Classroom. For the free response, the Unit 3 FRQ practice set has four questions, one of each kind on the exam, with a scoring guide.

More review: Unit 2 review · Unit 4 review · all units · all AP Physics 1 practice tests.

← Previous unitUnit 2: Force and Translational DynamicsNext unit →Unit 4: Linear Momentum

Common Questions

The CED gives Unit 3 18–23% of the multiple choice, as much as any unit. Of the 117 distinct official multiple choice questions still in the course, 26 are Unit 3 (22.2%), second only to Unit 2, about 8 questions on the 42-question section that starts in May 2027. On the free response it was 66 of 317 in-scope points on the 2015–2024 exams and 15 of 120 points on the 2025 and 2026 exams and the 2024 sample.

Conservation of mechanical energy. It is the largest question type in the whole course, 4.1% of the exam: 5 official multiple choice questions and the main task of free-response parts worth 20 points, in 2017, 2019, 2022, 2024 and 2025.

Yes, and more often lately. They were the main task of free-response parts in 2022, 2024 and 2025 and in one of the 2024 samples (10 points), after none in 2014–2021. There is no official multiple choice version, and none of the 2,278 classroom questions we tagged practices them.

Measuring energies before and after a process, for example a cart’s speed at the bottom of a ramp against its release height. It was the main task of free-response parts worth 26 points in 2016, 2019 and 2022, more than any other free-response type, and none of the classroom questions we tagged practice it.

K = ½mv², W = Fd cos θ, ΔK = ΣW, the spring potential energy ½k(Δx)², the gravitational potential energies −Gm₁m₂/r and mgΔy, average and instantaneous power, and g = 9.8 m/s². A calculator is allowed on the whole exam.

Practice this unit: free AP Physics 1 Unit 3 worksheet

Exam-style multiple choice with an answer key and a printable PDF, and a free-response set with a scoring guide. No sign-up needed.

Get the Unit 3 worksheet →

Keep reading

AP Physics 1

AP Physics 1 Review: The Most-Tested Questions, Unit by Unit

AP Physics 1 review: the exam format, what each unit is worth and the 10 question types that matter most, ranked from the official exams, with examples.

AP Physics 1

AP Physics 1 Unit 8 Review: The Most-Tested Fluids Questions

AP Physics 1 Unit 8 review: the 6 fluids question types that matter most, each with an example and the common mistake, and what the 2025–26 FRQs asked.

AP Physics 1

AP Physics 1 Unit 7 Review: The Most-Tested Oscillations Questions

AP Physics 1 Unit 7 review: the 6 oscillation question types that matter most, each with an example and the common mistake, including the dropped 2π.

Σ
SigmaPrep

Sigma Prep (sigmaprep.io) makes free AP Physics 1 practice: exam-style multiple choice and free response for all eight units, with answer keys and scoring guides, plus a formula sheet.

AP Physics 1

Practice tests by unitFree-response practiceFormula sheetUnit reviews

Sigma Prep

Math worksheetsAboutContact

Legal

TermsPrivacy
© 2026 Sigma Prep. All rights reserved.AP® is a trademark registered by the College Board, which is not affiliated with, and does not endorse, this site.